Zero Rust Paint
Zero Rust Paint: Sealing Out the Elements
Rust needs two things to spread: oxygen and moisture. Zero Rust built its paint line around denying it both. Rather than relying on a multi-layer system, Zero Rust is a direct-to-metal rust inhibitive coating that encapsulates existing rust and seals the steel beneath an impermeable barrier. Once oxygen and moisture are cut off, the corrosion process stalls.
What Makes the Formula Different
Zero Rust is a high-solids, phenolic-modified alkyd coating. It is designed for use on bare or rusted metal and is a single-package, air-dry product, so there is no two-part mixing and no pot-life clock to race against. Leftover material can be stored for later and touch-ups are straightforward. The formulation is lead-free and isocyanate-free, with low VOC content, and has been tested to exceed 2,000 hours of salt spray resistance under ASTM B117.
The coating is also designed to be forgiving on prep. It can go directly onto properly prepared surfaces, including new steel, old steel, rusty surfaces, and partially painted, partially rusted metal. Surfaces still need to be clean and free of dirt, oil, grease and silicone, and loose rust or flaking paint should be removed first. Hand tooling is generally adequate for loose rust. The paint dries to the touch in roughly 30 to 60 minutes.
Colors and Formats
Zero Rust paint is offered in four colors: red oxide, gray, black and white. It comes in quart, gallon and 12 oz. aerosol sizes. That range suits everything from a small bracket or fender repair to a full frame or trailer.
- Red oxide: a primer-style finish for steel that will be topcoated.
- Gray: a neutral finish for chassis, equipment and structural steel.
- Black: a common choice for frames, undercarriages and underbody components.
- White: a bright finish for equipment, tanks and utility applications.
Where It Fits
Zero Rust is used on classic car restoration projects, trailers and utility equipment, agricultural machinery, tools, industrial steel, and marine and outdoor metal surfaces. It is also used as an OEM-style coating on new trailers and structural steel. For vehicle owners, that means frames, suspension components, brackets and chassis parts that see road salt and moisture year after year.
Good to Know Before You Paint
- Mix the product thoroughly before use. This step is critical because the coating is heavy-bodied.
- If you thin it, for example for a siphon gun, apply additional wet film thickness to compensate.
- It is not a high-temperature paint, so keep it away from exhaust and other high-heat components.
- Unprotected colors can chalk and fade in exterior sunlight. This cosmetic change does not reduce corrosion resistance, and a compatible topcoat can restore appearance and UV stability.
- Re-coating is simple: scuff the surface with sandpaper first.
To compare Zero Rust against other rust-control options, browse the full Paint category, or learn more about the maker on the Zero Rust brand page.