Zero Rust
Zero Rust AR-61QT-CA Direct to Metal High Solid Primer 1 Quart Aerosol Gray
Zero Rust .67SP High Solid Rust and Corrosion Control Coating 12 oz Aerosol White
Zero Rust: Direct-to-Metal Rust Control
Zero Rust is a brand of high-solids, low-VOC coatings built around one job: stopping rust and corrosion on steel. The brand belongs to Gemini Industries, Inc. of El Reno, Oklahoma, and its coatings are used on everything from classic car frames and trailers to farm equipment, tools, railings and marine or outdoor metalwork.
How Zero Rust Coatings Work
The core of the line is a phenolic-modified alkyd formula. It is a single-package, air-dry, direct-to-metal (DTM) coating that puts down an impermeable barrier at the steel surface, cutting off the oxygen and moisture that corrosion needs. It is free of lead and isocyanates, and the maker says it can be applied over properly prepared or even partially rusted steel, with no sandblasting required, provided loose rust, dirt, oil and grease are removed first. The manufacturer also reports salt spray test results exceeding 2,000 hours (ASTM B117) at roughly 3.5 mils dry film thickness.
Primers and Rust Inhibitive Coatings
Most of the range falls under Zero Rust paint primer, where you will find the High Solid DTM Primer in gallon sizes and 12 oz aerosols. Shoppers browsing more specific listings can also look at Zero Rust primers and primers and sealers, which cover the same rust-inhibitive chemistry for different project needs. The primer-style colors, including red oxide, gray, black and white, make it easy to match the coating to the job. Black suits chassis and undercarriage work, while white and gray work well as a base for topcoats.
Topcoats, Paint and Prep Tools
Zero Rust can be used as a stand-alone protective coating or under compatible finishes. For color and visibility, the Zero Rust paint selection includes a Safety Yellow Gloss Topcoat in aerosol form. There is also a rustproofing kit option, a 24-piece prep paint pen counter display that suits touch-up work on small chips and exposed metal before rust can take hold.
What to Consider When Choosing
- Surface prep: Remove loose rust and contaminants, and let the surface dry fully if water-based cleaners were used.
- Container size: 12 oz aerosols suit spot repairs and tight areas; quarts and gallons suit brush, roll or spray application on larger parts.
- Film thickness: Corrosion protection depends on reaching the recommended dry film thickness, so avoid applying too thin.
- Use limits: The coating is not recommended for submersion applications.
For restoration projects, equipment maintenance and general metal protection, Zero Rust offers a straightforward approach to keeping steel from breaking down.