OTC Tools Tubing Cutter
OTC Tools Tubing Cutters for Tight Engine Bays and Undercar Work
Cutting tubing in a vehicle is rarely done on an open workbench. Brake lines run along frame rails, A/C lines hide behind brackets, and fuel and transmission cooler lines sit in cramped corners. That is the problem OTC Tools designs its tubing cutters to solve. Founded in 1925 as the Owatonna Tool Company, OTC has spent a century building tools for professional technicians, and it is now part of the Bosch Automotive Service Solutions family. Its tubing cutters reflect that heritage: simple, durable and made for real shop conditions.
The OTC 6514 Mini Heavy-Duty Tubing Cutter
The best-known cutter in the lineup is the No. 6514 Mini Heavy-Duty Tubing Cutter. It handles tubing from 1/8" to 5/8" O.D. (3mm to 16mm) and is built to cut copper, brass, aluminum and steel brake lines in hard-to-reach places. Two practical details set it apart:
- Folding ream: the reaming blade folds onto the cutter body for storage, so you can deburr the inside edge of a fresh cut without reaching for a separate tool.
- Spare cutting wheel: an extra wheel is stored with the cutter, so a worn wheel does not end the job.
A clean, square, burr-free cut matters because it determines whether a flare seals or leaks. A crooked or burred cut can lead to a weeping brake fitting or a restricted line, which is why a rotary tubing cutter is preferred over a hacksaw or side cutters for any line that will be flared or fitted.
Ratcheting Design for Confined Spaces
For spots where a standard cutter cannot make a full rotation, OTC offers a Ratcheting Tubing Cutter. Its ratcheting action works much like a socket ratchet, letting you advance the cut in short strokes. It cuts copper, aluminum, stainless steel and PVC in sizes from 1/8" to 1/2", and a spring-loaded adjusting screw applies continuous pressure while cutting, so you do not need to stop and re-tighten by hand. It is especially useful on A/C and HVAC lines near the firewall or condenser, where clearance is minimal.
Cutters Paired With Flaring Kits
Cutting is usually the first step in a brake line repair, and OTC integrates its cutter into its flaring sets. The Double Flaring Tool Set with Cutter includes the 6514 cutter along with adapters for double flaring 3/16", 1/4", 5/16", 3/8" and 1/2" tubing, and it also performs 45-degree single flares. A metric version covers 4mm through 10mm for double flares. Buying the cutter as part of a set means the cut and the flare come from tools designed to work together.
Choosing the Right Cutter
- Tubing size and material: match the cutter's capacity to the line you are working on, and confirm it handles steel if you are doing brake work.
- Access: a compact mini cutter or a ratcheting model is the better choice when swing room is limited.
- Finishing features: a built-in reamer and spare wheels reduce trips back to the toolbox.
Browse the full range of OTC Tools products for more specialty tools from this long-standing brand, or explore the wider tubing cutter category to compare options from other manufacturers.