Rear Window Wiper Relay
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
What Is a Rear Window Wiper Relay?
The rear window wiper relay is a small but critical electrical component in any vehicle equipped with a rear wiper system. Before power ever reaches the wiper motor itself, it passes through this relay. As explained by automotive electrical experts, the relay allows a small current signal from the dash switch to control the much larger current that actually powers the motor — meaning engineers can route high-amperage wiring away from the cabin and use a compact, low-current stalk or button at the wheel. It also serves a secondary purpose: isolating the wiper circuit helps suppress electrical noise that might otherwise interfere with the vehicle's audio and communication systems.
How Does It Work?
Wiper and washer relays are the electrical switching components that control power delivery to your wiper motors. When you activate the rear wiper switch, the relay energizes and closes the circuit, sending power to the motor. When you switch it off, the relay opens and cuts power — allowing the motor's internal parking circuit to sweep the blade back to its resting position before stopping. Some intermittent rear wiper systems use a relay paired with a timer, enabling the characteristic delay-wipe behavior many drivers rely on in light rain or snow.
Signs of a Failed Rear Window Wiper Relay
Relay failures typically fall into two categories: stuck open or stuck closed. A relay stuck open means no power reaches the motor at all — the rear wiper simply won't respond. A relay stuck closed keeps the circuit energized continuously, so the wiper runs nonstop even when the switch is off. Corroded relay contacts can also cause intermittent operation, especially in cold or wet weather, making the fault frustratingly difficult to reproduce during a dry-weather diagnosis. If your rear wiper has stopped working and the fuse is intact, the relay is a logical next component to inspect and test.
What to Look for When Replacing a Rear Window Wiper Relay
Because relays are not universal, it is important to match the replacement to your vehicle's exact specifications. Key attributes to verify include the relay's amperage rating, coil resistance, and pin configuration. A relay with the wrong coil resistance can cause intermittent operation even if it physically plugs into the socket. Most relays are located in the fuse or relay box under the dashboard or hood — your vehicle's service manual will identify the exact location and slot. There is no set replacement interval for most relays; they tend to fail on demand, often after years of heat cycling and exposure to underhood moisture.
Top Brands for Rear Window Wiper Relays
Beck/Arnley is a well-established name in the replacement parts space, with roots going back to 1914. The brand has long specialized in parts for import and foreign nameplate vehicles — Honda, Toyota, Subaru, BMW, and others — a niche that demands precise fit and electrical compatibility. Beck/Arnley designs its parts to meet OE specifications for form, fit, and function, making their rear window wiper relays a reliable choice when restoring a rear wiper system to factory performance.