Breakaway System Switch
What Is a Breakaway System Switch?
Breakaway system switches are one of the most critical — and most overlooked — safety components on any trailer equipped with electric brakes. Breakaway system switches serve as the last line of defense against a runaway trailer: if your trailer ever becomes accidentally uncoupled from your tow vehicle, this small switch triggers your trailer's electric brakes automatically, bringing it to a controlled stop without any input from the driver.
The mechanism is elegantly simple. A breakaway switch mounts to the trailer frame, and a lanyard cable connects it to a secure anchor point on the tow vehicle. Under normal towing conditions, a pin inserted into the switch keeps the circuit open and the brakes inactive. If the trailer separates from the tow vehicle, the taut cable pulls that pin free, closing the electrical circuit between the trailer's dedicated 12-volt battery and the electric brake assemblies. The result: the brakes engage immediately and hold until the battery is disconnected or exhausted.
Why a Breakaway Switch Matters
Beyond the obvious safety imperative, breakaway system switches are also a legal requirement in many states and provinces for trailers with electric brakes. Industry standards require that once activated, the system must hold the brakes engaged for a minimum of 15 minutes — enough time for a separated trailer to come safely to rest. It's important to note that these switches are strictly for emergency use; activating the switch while parked can drain the battery and damage brake magnets.
Proper installation and regular testing are essential. Experts recommend testing the system before every tow by spinning a jacked-up wheel and pulling the pin to confirm the brakes lock. The entire breakaway system — switch, battery, and wiring — should be inspected periodically and replaced every few years to account for corrosion and component wear.
What to Look for When Shopping
- Sealed construction: Look for switches with weatherproof polymer or nylon housings that resist rust and corrosion from road exposure.
- LED indicators: Some switches include a built-in LED that confirms 12V power is reaching the brakes, making testing fast and intuitive.
- Cable length: A 48-inch lanyard cable is the most common standard, but confirm your mounting position allows the cable to pull free cleanly if a separation occurs.
- Compatibility: Verify the switch is rated for your trailer's axle count — systems are available for single-, tandem-, and multi-axle configurations.
- Rechargeable vs. non-rechargeable battery: Kits with rechargeable batteries and a trickle-charge connection are a smarter long-term investment.
Top Brands for Breakaway System Switches
Tekonsha is widely regarded as the industry leader in electric trailer brake controls and breakaway systems. Their Shur-Set III line features completely sealed nylon switches, weather-resistant heavy-duty polymer battery cases, and systems engineered to meet or exceed DOT specifications for 1- to 4-axle trailers.
Hopkins offers a broad lineup of breakaway switches designed for ease of use, including models with built-in LED indicators that visually confirm 12V power is flowing to the brakes — a handy feature for quick roadside checks. Their switches are known for broad compatibility across most major breakaway systems.
Blue Ox brings its deep towing expertise to the breakaway switch category with the Patriot Breakaway Switch, a purpose-built solution designed to integrate seamlessly with Blue Ox's supplemental braking systems for flat towing and conventional trailer applications.
AP and AP Products round out the category with straightforward, reliable replacement switches suited for a wide range of trailer types, making them a practical choice for maintenance and parts replacement on RVs and utility trailers.