ShuttleSlide Fastener Kits & Displays
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
ShuttleSlide: Retractable and Rotating Trolling Motor Mounts
ShuttleSlide is a boating-focused manufacturer built around one idea: a trolling motor should not be fixed in place on the deck. Most mounting brackets give you a single static position, which leaves the motor hanging over the bow and exposed to dock rash, trailer contact and rough water. ShuttleSlide has been making trolling motor mounts since 2016, and its linear, retractable designs let anglers slide the motor back when stowed and position it where it is needed when fishing.
Why Retractable Mounts Matter
A bow-mounted trolling motor carries a lot of overhang, and that overhang is where damage usually happens. A sliding mount pulls the motor back toward or inside the rub rail, reducing the risk of impact when launching, docking or trailering. ShuttleSlide describes its system as self-lubricating and self-cleaning, designed to shed debris rather than collect it, which is a practical advantage in a wet, gritty environment where traditional roller bearings can bind or corrode.
The brand's retractable lineup spans heavy-duty (HD) and ultra heavy duty (UHD) models in several travel lengths. The mounts are CNC machined from 6061-T6 aluminum plate and are designed to work with motors from Minn Kota, MotorGuide, Rhodan and others, depending on shaft length and bolt pattern. A lifetime warranty backs the mounts, and it is worth reading the full coverage terms before you buy.
Rotating Mounts, Spacers and Support Hardware
Beyond sliding mounts, ShuttleSlide builds rotating bracket designs such as the SS-7.5R and the larger-diameter SS-9.5R, both finished in black. These let you swing the motor into a safe position on the deck. The catalog of ShuttleSlide trolling motor parts and accessories includes the supporting pieces that make a clean installation possible: aluminum spacers sized for the 7.5R and 9.5R mounts, the BKP-9.5R aluminum backing plate, and the QST-1 expansion plate for mounting on awkward deck layouts.
Proper backing and hardware matter as much as the bracket itself. A trolling motor puts leverage and vibration through the deck, so a backing plate spreads that load instead of concentrating it on a few bolts. ShuttleSlide's fastener kits, including the 4-inch-long 3/8 inch 375FHX40 fasteners, are intended for thicker deck and spacer stack-ups where standard hardware falls short.
Shopping Considerations
- Shaft length and motor weight: Match the mount's rated shaft length and motor weight to your motor, and move up to a UHD model for longer shafts or heavier motors.
- Retraction distance: Choose a travel length that brings the motor far enough back for your hull shape and rub rail position.
- Deck support: Plan for spacers, backing plates and the correct fasteners, especially on uneven, sloped or thin decks.
- Bolt pattern compatibility: Confirm the mount matches your motor or existing quick-release bracket.
If you are rounding out a rig, ShuttleSlide's fishing parts and accessories offering adds to the mounting solutions designed for anglers who want their trolling motor protected and easy to deploy. Browse the full ShuttleSlide brand page to see every mount, spacer and plate available.