ITW Devcon 10710 Aluminum Liquid F-2 Epoxy 1 lb Kit

The ITW Devcon 10710 Aluminum Liquid (F-2) is a professional-grade, aluminum-filled pourable epoxy designed for making molds, patterns, and holding fixtures. This two-part liquid epoxy system provides exceptional detail reproduction and versatility for metalworking and manufacturing applications.

Key Features:

• Aluminum-filled pourable epoxy with low viscosity for accurate reproduction of mold details and intricate parts
• Can be machined, drilled, or tapped after curing for precision finishing work
• Cures to a durable aluminum-gray finish with excellent dimensional stability
• 75-minute working time provides ample time for application and positioning
• Full cure in 16 hours at room temperature
• Qualifies under Federal Specification MMM-A-1754 for adhesive/sealing applications
• Marine grade formulation with water-resistant properties
• Low odor, 0% VOC content for safer workplace use

Technical Specifications:

• Mix ratio: 5:1 (resin to hardener)
• Tensile shear strength: 2,700 PSI
• Compressive strength: 9,000 PSI
• Hardness: 85 Shore D
• Maximum service temperature: 250°F
• Dielectric strength: 100 V/mil
• Gap fill capacity: up to 1 inch
• Coverage: approximately 70 square inches per pound

Ideal for creating non-rusting molds and fixtures, this epoxy provides self-leveling application and low shrinkage for consistent results. The aluminum filler provides excellent thermal conductivity and metallic properties while remaining lightweight and easy to work with. Made in the USA.