BMR Suspension Suspension Trailing Arm / Panhard Rod Kit
Why Rear Lateral Location Matters — and Why BMR Gets It Right
On solid-axle performance vehicles, the Panhard rod (also called a track bar) is one of the most critical and most overlooked suspension links. A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. When that component is made from weak materials or fitted with soft bushings, the axle shifts under load — introducing the kind of unpredictable handling that costs lap times and confidence alike. This is exactly the problem that BMR Suspension set out to solve with their line of Suspension Trailing Arm / Panhard Rod Kits.
Built Beyond Factory Standards
Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel with soft rubber bushings that allow excessive deflection under load. BMR's answer to this is straightforward and uncompromising. BMR Suspension's PHR005 Panhard rod is made from 1.25-inch, 0.120-inch wall DOM tubing for unrivaled strength. That's a fundamentally different approach to material selection — one driven by the fact that BMR Suspension products are street driven and track tested on BMR project vehicles, and virtually every BMR employee is a racer or hot rodder as well.
The Internally Fluted Bushing Advantage
Where BMR truly differentiates itself is in bushing engineering. The PHR005 features greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. But the design goes deeper than just durometer rating. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high compression loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated — ensuring quiet, reliable operation over the life of the bushings. The result is a bushing that stays lubricated under the harshest conditions rather than drying out and developing noise or slop over time.
Geometry Correction for Lifted and Lowered Applications
Beyond replacement rods, BMR also offers relocation hardware for builds where ride height has changed. BMR's relocation kits replace the upper Panhard rod support and relocate the Panhard rod mounts, with heavy-duty brackets that bolt to existing mounting holes and lower the Panhard rod while maintaining the correct geometry. No drilling or welding is required, making these an accessible upgrade even for builders without a full fab shop. For Ford Bronco owners who have installed a lift, the geometry of the Panhard rod can be altered when lifting a Bronco, causing handling issues — and BMR's Panhard Rod Relocation Kit (PRR1860) corrects that geometry.
Designed for Every Performance Discipline
BMR Suspension designed the PHR005 to work well for street performance, drag race, and road race applications. The non-adjustable PHR005 is ideal for stock-height builds where the priority is strength and bushing quality over adjustability, while the on-car adjustable PHR006 caters to builders who need fine-tuned axle centering after a suspension modification. Both variants are MIG-welded and finished in a durable powdercoat, available in black hammertone or red to match any build aesthetic. All BMR products are proudly made in the USA in a manufacturing facility near Tampa, Florida, where American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel.
Whether you're chasing consistent 60-foot times at the strip or hunting apexes on a road course, BMR Suspension's trailing arm and Panhard rod kits deliver a level of engineering precision that factory components simply cannot match. Browse the full selection above, or explore the complete BMR Suspension catalog and the broader Suspension Trailing Arm / Panhard Rod Kit category for more options.