NGK 3696 V-Power Spark Plug BKR6EY Copper Core Nickel V-Cut

The NGK 3696 V-Power Spark Plug (BKR6EY) is a copper-core, nickel-electrode spark plug. It is built for reliable ignition and consistent combustion in engines that use standard nickel-tipped plugs. NGK is a leading OE spark plug supplier. This plug is a direct replacement for the original BKR6EY and works as a dependable upgrade over standard plugs.

Key Features:

• V-cut nickel center electrode: The V-groove puts the spark closer to the air/fuel mixture. This helps ignition and lowers the voltage the ignition system needs.
• Copper core: It removes heat and conducts well, which gives a broad heat range.
• Trivalent metal plating: It resists corrosion and helps prevent seizing in the cylinder head.
• Cold-rolled threads: They help protect the cylinder head threads during installation.
• Alumina silicate ceramic insulator: It gives strength and good heat transfer.
• Corrugated insulator ribs: They help prevent flashover.
• Triple seals: They prevent combustion leakage.
• Resistor design: The 5K ohm resistor helps suppress radio interference.

Specifications:

• NGK part number: 3696 (BKR6EY)
• Heat range: 6
• Thread size: 14 mm, with a 1.25 mm pitch
• Reach: 19 mm (3/4 in)
• Hex size: 5/8 in (16 mm)
• Seat type: Gasket
• Terminal type: Solid
• Gap: 0.035 in (0.9 mm)
• Center electrode: Nickel, V-cut, 2.5 mm, projected
• Ground electrode: Nickel, standard
• Torque: 18-25.3 lb-ft in cast iron heads, 18-21.6 lb-ft in aluminum heads
• Service life: up to about 30,000 miles

Cross-References: Autolite XST3924 and XST3924DP, Beck/Arnley 1765212, DENSO 3122 and K20R-U, Bosch 7406, FGR7KQE and FGR7KQE0, Nissan 22401-2DR06 and 22401-53J06.