H&R 707957401 TRAK+ Wheel Adapters 5/130 to Porsche Cayenne Fitment (Pair)

The H&R 707957401 TRAK+ Wheel Adapters are hubcentric spacer-adapters designed to convert a vehicle's existing bolt pattern to accept Porsche Cayenne wheels (5/130 bolt pattern, 71.6mm center bore). Sold as a pair, these adapters mount to the vehicle hub exactly like a standard TRAK+ wheel spacer, but feature a different bolt pattern on the wheel-facing side — enabling non-standard bolt pattern wheel fitment with a secure, factory-quality fit.

Constructed from a proprietary aluminum/magnesium alloy, H&R TRAK+ Wheel Adapters weigh up to 70% less than comparable steel products while maintaining exceptional strength and durability. A hard-anodized finish protects against corrosion and wear, making them suitable for year-round use including winter driving with snow tire and wheel setups.

Key Features:

• Hubcentric design — fits precisely to the vehicle hub for a vibration-free, balanced fitment
• Adapts to 5/130 bolt pattern with 71.6mm center bore (Porsche Cayenne wheel compatible)
• Increases track width, lowering the roll center and improving lateral stability and handling
• Made from a proprietary aluminum/magnesium alloy — up to 70% lighter than steel equivalents
• Hard-anodized finish for long-lasting durability and corrosion resistance
• Suitable for winter use with snow tires and wheels
• Sold as a pair (two adapters)

Wheel Bolt Selection Guidelines:

When ordering wheel bolts for use with TRAK+ adapters, follow these important guidelines:

• New bolts must be longer than the originals by the width of the adapter used
• The bolt head style must match the existing bolt — verify taper or round head type before ordering
• Bolt head types by end digit: Taper 60° — end digit 01 | Round head M12/d24mm or M14/d28mm — end digit 02 | Round head M12/d26mm (OE VAG wheels) — end digit 03 | Flat head for Porsche OE wheels M14×1.5 — end digit 06

Minimum Wheel Bolt Engagement (Safety Guidelines):

• M12×1.25 — 8.0 turns (approx. 10mm load-bearing shaft length)
• M12×1.50 — 6.5 turns (approx. 10mm load-bearing shaft length)
• M12×1.75 — 6.5 turns (approx. 12mm load-bearing shaft length)
• M14×1.25 — 9.0 turns (approx. 12mm load-bearing shaft length)
• M14×1.50 — 7.5 turns (approx. 12mm load-bearing shaft length)
• 1/2" UNF — 8.0 turns (approx. 11mm load-bearing shaft length)

After installation, always rotate the wheel by hand to confirm free movement and verify that wheel bolts do not contact any brake system components such as ABS sensors. Note that maximum clearance tolerance on some vehicles may be as little as 2mm.