Quality Trailer
Quality Trailer 07-27700-0 Splined Shackle Bolt Pair for Trailer Leaf Spring Suspension
Quality Trailer: Suspension Hardware for Leaf Spring Trailers
Quality Trailer is a line of replacement suspension hardware for leaf spring trailers. The parts focus on the small but critical components that hold an axle to its springs and keep the whole running gear aligned: shackle bolts, U-bolts, tie plates and spring slides. These are the pieces that wear, rust and loosen over time, and replacing them at the right moment helps keep a utility, boat or equipment trailer tracking straight and riding predictably.
What the Quality Trailer Range Includes
The Quality Trailer lineup is built around leaf spring suspension repair. Typical items include:
- Splined shackle bolt pairs for securing leaf spring eyes to hangers and shackles. The splined design is intended to help the bolt stay seated in its mounting rather than spinning.
- Square U-bolts in galvanized and other finishes, offered in several dimensions such as 7/16 inch diameter with varying thread lengths, to clamp square tube axles to the spring pack.
- Tie plates, including 5 inch zinc plated steel versions, which sit under the axle and spread U-bolt clamping force across the spring assembly.
- Double-eye spring slides in left and right configurations for supporting the spring ends and allowing controlled movement as the trailer carries load.
Why This Hardware Matters
A trailer's leaf springs do a lot of work: they carry the load, absorb road shock and locate the axle. The fasteners and plates that connect those parts are under constant stress, especially on boat trailers exposed to water and road salt. A stretched U-bolt, a worn shackle bolt or a cracked tie plate can allow the axle to shift, accelerate tire wear and, in the worst case, lead to a failure on the road. Inspecting this hardware at regular intervals and replacing it as a set is a common maintenance practice.
Choosing the Right Parts
Fit is everything with suspension hardware. Before ordering, consider the following:
- Axle shape and size: Square tube axles need square U-bolts sized to the tube, while round axles use different U-bolt shapes.
- U-bolt dimensions: Match the diameter, inside width and leg length to your axle and spring pack height.
- Finish: Galvanized and zinc plated finishes add corrosion resistance, which is especially useful for marine and wet-weather use.
- Spring type and side: Double-eye spring slides are handed, so confirm left or right placement.
- Replace as a set: Swapping U-bolts, plates and shackle bolts together helps ensure even clamping and consistent wear.
Always compare part numbers and measurements against your existing hardware or the trailer manufacturer's specifications, and use new lock nuts and proper torque values when reassembling.