Relable Machine Brake Hydraulic Line Assortment
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
About Relable Machine
Relable Machine is a supplier of trailer running-gear components, with a product range centered on the hardware that connects a trailer's wheels, axle and suspension. Its catalog includes trailer hubs, brake drums, and an extensive selection of round and square axle U-bolts and U-bolt kits. These are the parts that carry load and keep a trailer tracking straight, which makes them a practical focus for anyone maintaining a boat trailer, utility trailer or other light-duty hauler.
Trailer Hubs and Hub Assemblies
Hubs are the rotating core of a trailer wheel end. Relable Machine offers hubs in common five-stud configurations, including 5-on-4.5 bolt patterns, and demountable high-speed trailer hub designs. Complete assemblies of this style are typically supplied with the studs or bolts, inner and outer bearings with cups, a grease seal and a dust cap, which simplifies a wheel-end rebuild because the wear items arrive together.
For owners who want a bearing-equipped unit, the axle bearing and hub assembly category is the place to look. When replacing a hub, it pays to confirm the bolt pattern, the bearing sizes and the spindle taper, since hubs that look alike can use different bearing numbers.
Brake Drums and Suspension Hardware
Beyond hubs, the range includes brake drums such as a 10-inch, 5-on-4.5 drum for trailers with drum brakes. The brand also covers the fasteners that secure an axle to its leaf springs, including:
- Round trailer axle U-bolts in sizes from 1-3/4 inch inside diameter up to 3-1/8 inch
- Square axle U-bolts, including 2-1/8 inch widths
- U-bolt kits sized for common axle and 1-3/4 inch spring combinations
- Hardware assortments and shock absorber kits
Choosing the Right Parts
U-bolts are sized by the distance between the legs, the leg length and the rod diameter, and each of those must match the axle tube and spring pack. A round axle needs a round-bend bolt, while a square axle needs a square-bend bolt. Zinc-plated finishes help resist corrosion, which is especially valuable on trailers that see water or road salt. It is also good practice to replace U-bolt hardware whenever an axle or spring is serviced rather than reusing stretched fasteners.
Whether you are refreshing a worn wheel end or re-securing an axle, Relable Machine's trailer-focused range offers matched components for routine maintenance and repair.