Fulton Performance Winch
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
Fulton Performance Trailer Winches: Over a Century of Pulling Power
When it comes to loading a boat, PWC, or utility trailer at the ramp, few names carry more authority than Fulton Performance. Founded in 1911, Fulton has spent well over a century engineering trailer hardware that performs when conditions are at their worst — and nowhere is that reliability more critical than in a trailer winch. Whether you're hauling a jet ski onto a single-axle roller trailer or pulling a heavy bass boat up a steep concrete ramp, Fulton's winch lineup is built to handle the job with precision and durability.
The XLT™ and F2® Winch Lines
Fulton's winch catalog spans two primary lines designed to cover a broad range of trailer capacities and use cases. The XLT™ series represents the brand's workhorse lineup, offering single-speed models ranging from 900 lbs. up through 1,800 lbs. of rated capacity — covering everything from lightweight PWC trailers all the way to larger single-axle boat trailers. For heavier-duty applications, Fulton's two-speed models — including the F2® Marine Trailer Winch — scale capacity up to 2,600 lbs. and beyond, with the premium Sharkskin finish for an elevated look on high-end trailer setups. The two-speed configuration allows operators to use a fast retrieve ratio for quick line take-up and then shift to the higher-torque ratio for the final, harder pull.
Engineering That Sets Fulton Winches Apart
Across the entire winch lineup, Fulton builds in a suite of features engineered for long-term performance in demanding marine environments:
- Solid Drum Gear System — Full-length drum bearings and oil-impregnated shaft bushings deliver smooth, efficient cranking and lasting durability.
- Z-MAX 600 Zinc Finish — An industry-leading high-performance zinc coating that provides excellent corrosion resistance in saltwater, marine, and outdoor conditions.
- Stamped Carbon Steel Frame — Rigid frame construction maintains critical gear alignment and extends overall cycle life.
- High-Carbon Steel Gears — Superior strength compared to standard steel gears, designed to handle repeated heavy loads without wear.
- Factory-Lubricated Drive System — Ready to use straight out of the box with no break-in lubrication required.
- Comfort Grip Handle — An ergonomically designed handle that reduces fatigue during long loading sessions at the ramp.
- 2-Way Ratchet System — Allows operators to wind in and pay out line with full ratchet control in both directions, plus a neutral position for free-spooling.
Matching the Right Winch to Your Trailer
Fulton offers winch capacities across a wide spectrum — from 900 lb. models ideal for small boat, snowmobile, and ATV trailers, to 1,500 lb. and 1,800 lb. units suited for single-axle boat trailers in the 14–30 foot range, up to 2,600 lb. and 3,200 lb. two-speed models for larger vessels and heavy-duty utility applications. As a general rule, the winch's rated capacity should meet or exceed the actual load being pulled. Gear ratios also vary by model — lighter-duty units typically run a 3.1:1 or 4.1:1 ratio, while the 1,800 lb. models step up to 5.1:1 for added mechanical advantage on heavier loads.
Backed by a 1-year Fulton warranty and the credibility of a brand that has been setting the standard in trailer hardware for over a century, these winches represent a dependable upgrade for any marine or utility trailer setup. Browse the full range of Fulton Performance products or explore the complete selection of trailer winches to find the right match for your rig.
