BTR Engine Push Rod
BTR Chromoly One-Piece Pushrod Long Diameter Wall Individual Engine Push Rod
BTR PR7400343-16 Chromoly One-Piece Pushrod Set 7.400in x 11/32in .080 Wall
BTR PR7825375-8 Chromoly One-Piece Pushrod 7.825" 3/8" Diameter .080" Wall Individual
BTR PR7550312-16 Chromoly One-Piece Pushrods 7.550in Long 5/16in Diameter .080in Wall
BTR PR7525312-16 LS Chromoly One-Piece Pushrods 7.525" Long 5/16" Diameter .080" Wall
BTR PR7400312-1 Chromoly One-Piece Pushrod 7.400in Length 5/16in Diameter .080in Wall
BTR PR7425375-16 4130 Chromoly One-Piece Pushrod Set 3/8 in. 7.425 in. .080 Wall
BTR Engine Push Rods: Precision Chromoly Performance for LS & LT Builds
When it comes to valvetrain upgrades for GM LS and LT engines, few names carry as much credibility in the performance community as Brian Tooley Racing (BTR). Their lineup of engine push rods is a direct reflection of the brand's engineering philosophy: uncompromising precision, proven materials, and real-world durability for everything from weekend street cars to dedicated race builds.
SAE 4130 Chromoly Construction
BTR precision-formed pushrods are constructed from SAE 4130 chromoly tubing, centerless ground to exacting tolerances, and case hardened to Rc 60. That hardness rating is no accident — it ensures the ball ends and tube body stand up to elevated valve spring pressures and aggressive camshaft profiles without wear or deformation over time. The ball ends are machined to a tolerance of plus or minus .001 inch, and the pushrods are laser-etched with the part number and specifications on a black oxide finish.
One-Piece Design Eliminates Weak Points
BTR's one-piece, precision-formed pushrod design eliminates the weak points and flex commonly found in factory pushrods. This matters most when running a performance camshaft with tighter lobe separation angles, higher lift, or stiffer valve springs — conditions under which a weaker, multi-piece, or thin-wall pushrod can deflect, causing inconsistent valve timing and accelerated wear throughout the valvetrain.
A Size for Every LS & LT Application
BTR offers pushrods across a wide spectrum of diameters and lengths to suit virtually any GM performance platform. Their chromoly pushrod lineup includes 5/16", 11/32", and 3/8" diameter options, available individually or in sets of 16, with lengths selectable to fit your specific build.
- Gen III/IV LS Engines: Designed for 4.8L, 5.3L, 5.7L, 6.0L, and 6.2L LS-based engines — including LS1, LS2, LS3, LS6, L76, L92, L99, LQ4, LQ9, L33, and LSA — these pushrods maintain proper valvetrain geometry while providing enhanced strength over OEM components.
- Gen V LT Engines: The BTR 7.850" Chromoly Pushrods are a premium valvetrain upgrade designed for 2014-and-newer GM Gen V LT-based engines, built to handle aggressive camshaft profiles and increased valve spring pressures.
- LS7 Applications: BTR's LS7 chromoly pushrods are engineered for extreme durability and valvetrain stability in high-performance LS7 applications, featuring a one-piece design from SAE 4130 chromoly tubing, centerless ground and case hardened to Rc 60, with a 3/8" diameter, .080" wall thickness, and 7.800" length to withstand high spring pressures and elevated RPM without deflection.
The Right Pushrod for Your Build
Selecting the correct pushrod length is critical — it is imperative to measure for pushrod length using the correct method, not simply overall length. BTR's range of individual pushrods (sold separately) makes it easy to dial in the exact length needed when custom valvetrain geometry comes into play, such as when decking a block, swapping cylinder heads, or installing an aftermarket cam with a different base circle.
Whether you're refreshing a street cruiser or assembling a high-winding track car, explore the full engine push rod category or browse everything BTR has to offer for your next build.