Competition Engineering Suspension Traction Bar Bolt
Traction bars only work as well as the hardware that holds them to the spring and axle. Competition Engineering has long built bolt-on traction devices for street machines and drag cars, and the fasteners in those kits are engineered as part of the system, not treated as afterthoughts. This page covers the brand's suspension traction bar bolt offering within the wider Suspension Traction Bar Bolt category.
The J-Bolt Kit: Hardware With a Job to Do
The standout item here is the J-bolt kit (part number C7032), which Competition Engineering lists for adjusting pinion angle or changing traction bar angle on leaf spring cars and trucks. On a leaf spring car, the axle wraps up under hard acceleration. A traction bar limits that rotation and turns some of the twisting force into downward pressure at the tire contact patch. How the bar is positioned and preloaded determines how well it does that.
Enthusiasts who run these bars often point to the J-bolt's adjustability. Compared with a standard U-bolt mounting, a J-bolt setup lets you add or remove preload at the front of the bar, which helps tune a straighter launch with less body twist. The factory instructions for the bars also note that the J-bolts and front safety U-bolts should not be used to set bar height. Angle adjustments are handled with wedges, and the J-bolt is trimmed as needed to gain ground clearance once everything is set.
Why Bolt Choice Matters on a Traction Bar
- Pinion angle control: Without correct pinion angle, traction suffers regardless of bar quality. Adjustable hardware makes it practical to dial this in.
- Grade and size: The J-bolts supplied with Competition Engineering leaf spring bars are 1/2-inch Grade 8 fasteners, a strength level suited to the loads a launching rear axle creates.
- Ground clearance: J-bolts are long by design so they can be cut to fit. Trimming them after final adjustment helps keep hardware above the scrub line, which matters in states with inspection rules about parts hanging below the tire.
- Safety backup: Square safety U-bolts at the front of the bar help keep it from rotating downward under hard braking.
Part of a Complete Traction System
Competition Engineering describes its bolt-on traction line as meeting the needs of street enthusiasts and entry-level racers, letting you handle moderate horsepower without welding or fabrication. The product range includes Competition leaf spring bars aimed at Stock Eliminator and Bracket Racing, coil spring bars for applications like GM intermediates, and the patented Slide-A-Link, a telescoping design with an adjustable jack screw for free travel and preload. The company says each part is designed for a specific application and developed with CAD/CAM tools and track testing, and the bolt hardware is meant to work as part of that fitted system.
Shopping Tips
- Match the hardware to your bar style and spring configuration before ordering.
- Plan on trimming J-bolts to length, and check clearance with the car at ride height and loaded.
- Recheck torque after the first few launches, since spring pack movement can loosen fasteners.
To see everything the manufacturer makes, visit the full Competition Engineering brand page, or browse the complete Suspension Traction Bar Bolt category to compare options from other makers.