Phoenix Systems Brake Hydraulic Fluid Test Strip
Phoenix Systems 3006-PLUS Brake Fluid Test Strips - 100 Count BrakeStrip Copper Test Kit
Phoenix Systems BrakeStrip: A Copper-Based Approach to Brake Fluid Testing
Brake fluid is easy to overlook, yet it is one of the most safety-critical fluids in any vehicle. Many technicians and owners still judge it by color alone, which can be misleading. Phoenix Systems built its test strip line around a more objective method. The BrakeStrip is a dip-and-read test that gives a clear, repeatable indication of fluid condition in about 60 seconds.
How BrakeStrip Testing Works
The BrakeStrip does not measure moisture directly. It measures dissolved copper in the fluid, a byproduct of corrosion inside the brake system. As brake fluid ages, its corrosion inhibitors deplete, and metal components such as brake lines and ABS parts begin to corrode. To run the test, you dip a strip into the reservoir fluid and wait roughly one minute. The strip changes color, and you compare it against a reference chart. That visual evidence shows whether the fluid should be replaced.
Phoenix Systems notes that its results follow Motorist Assurance Program (MAP) guidelines for brake fluid replacement. This gives shops a recognized standard to point to when recommending service, rather than relying on guesswork.
Product Options
- BrakeStrip kit: A tube of 100 strips paired with 100 color rating cards, so you can hand customers a printed record of their fluid condition.
- BrakeStrip 100-pack: A tube of 100 professional strips for shops that already have reference materials.
- BrakeStrip Plus (brake + coolant): Double-ended strips with one end for brake fluid and the other for coolant. The brake end is intended for DOT 3, DOT 4 and DOT 5.1 fluids, while the coolant end works with all coolant colors and types when the coolant is diluted as it runs in the vehicle.
Why Phoenix Systems Stands Out Here
Phoenix Systems has engineered and built its tools in the USA since 1994, and the company is best known for patented reverse-flow brake and clutch bleeders. The test strips fit naturally into that workflow. You test first to confirm a fluid exchange is needed, then service the system. The company states that BrakeStrip is recommended by brake manufacturers such as Bendix and Raybestos. Its testing approach has also been marketed as an industry-standard brake fluid test under the FASCAR name.
A strip that shows its result as a color is also easy to explain. Technicians often report that customers trust a result they can see for themselves, which makes service recommendations more transparent.
Tips for Getting Reliable Results
- Draw your sample from the reservoir and keep the strips sealed in their tube between uses.
- Read the strip against the chart promptly and in good lighting, since higher copper levels can be harder to tell apart by eye.
- Do not test coolant in undiluted concentrate with the double-ended strips.
- Remember that BrakeStrip tests copper corrosion, not moisture. Some shops pair it with a separate moisture check for a fuller picture.
To explore the full range of tools and fluid-service products from this manufacturer, visit the Phoenix Systems brand page. If you want to compare other testing options and learn more about what to look for, browse the full Brake Hydraulic Fluid Test Strip category.