Artec Industries BR1061 Adjustable Link Tower Single Axle Tube - 3.25

The Artec Industries BR1061 Adjustable Link Tower is a high-strength suspension bracket designed for off-road vehicles running 3-link suspension systems. This single-position tower combines functional engineering with clean aesthetics, featuring a wide base design that provides superior strength compared to traditional c-channel style brackets.

Adjustable Mounting Heights:

This bracket features three mounting positions at 7, 8, and 9 inches from the axle centerline, allowing you to fine-tune your suspension geometry without cutting and re-welding. This adjustability is particularly valuable when changing tire sizes or dialing in suspension performance, as you can simply relocate your link to a different hole rather than fabricating an entirely new bracket.

Joint Compatibility:

Designed for large suspension joints with a 2.625-inch mounting width, including 1.25-inch rod ends (heims) with misalignment spacers and rebuildable cartridge-style joints (Johnny Joint, Flex Joint, Ballistic, and similar 2.5-2.625 inch wide joints). The 9/16-inch mounting holes can be drilled larger to accommodate different bolt sizes.

Construction and Assembly:

Fabricated from 0.250-inch (1/4-inch) thick mild steel for durability in demanding off-road conditions. The bracket comes as four unwelded pieces that jig together for precise alignment during welding. This kit is sized for 3.25-inch diameter axle tubes and can be modified to fit other tube sizes with basic fabrication tools.

Application:

Intended for 3-link suspension configurations where a single straight upper control arm mount is required. For applications requiring angled towers, Artec offers a 10-degree offset version separately.

What's Included:

• One adjustable link tower bracket (four unwelded pieces)
• Three mounting hole positions (7", 8", 9" from axle centerline)
• Designed for 3.25-inch axle tube diameter
• 0.250-inch thick steel construction
• Accommodates 2.625-inch wide suspension joints

Installation Note: This product requires welding and fabrication skills. Installation should only be performed by a competent welder. Artec Industries provides no guarantees or warranties and is not liable for improper installation.