Moog Chassis Parts Alignment Cam Guide Pin
Why Alignment Cam Guide Pins Matter for Your Front-End Setup
An alignment cam guide pin may be one of the smallest components in your vehicle's front suspension, but its role is anything but minor. These pins anchor the cam plates on the upper control arm, holding the eccentric cam bolts in position so that caster and camber angles can be properly set during a wheel alignment. When a guide pin bends, shears, or goes missing, the cam rotates freely — and alignment technicians simply cannot bring the vehicle into spec. The result is accelerated, uneven tire wear, compromised handling, and a steering feel that never quite seems right.
Common on GM full-size trucks and SUVs — including Chevrolet Silverado, GMC Sierra, Tahoe, Suburban, Yukon, and Cadillac Escalade platforms — these pins are more vulnerable than they look. Road stress, corrosion, and the torque applied during alignment procedures can all cause failures. When they go, a quality replacement matters enormously.
Moog's Approach to Alignment Cam Guide Pins
Moog Chassis Parts brings its signature “Problem Solver” philosophy to the Alignment Cam Guide Pin category. For over a century, Moog has built its reputation by engineering aftermarket chassis components that are easier to install and outlast the OE parts they replace. That same attention to detail extends to these precision pins.
Moog's alignment cam guide pins — including the widely referenced K6716 and K100206 part numbers — are engineered as direct-fit, OE-style replacements that slide cleanly into the factory cam plate without modification. The goal is simple: get the cam bolt anchored exactly where it belongs so that alignment angles can be dialed in precisely and held there for the long haul.
- Direct-fit OE-style design for a seamless drop-in installation into the factory cam plate
- Engineered for adjustability — Moog's alignment parts are designed to provide flexibility in setting caster, camber, or both
- Broad GM platform coverage, with fitment spanning multiple generations of Silverado, Sierra, Escalade, Tahoe, Suburban, Yukon, Savana, and more
- Problem Solver pedigree — constant design enhancements focused on extending product life and simplifying replacement
The Right Fix for a Critical Chassis Problem
Replacing a bent or sheared alignment cam guide pin is not a job to shortcut with a DIY rod-stock weld or a junkyard pull. The precise geometry of the pin determines how accurately the cam can be positioned — and how reliably it stays in place under load. Moog's engineers design these parts with the alignment technician in mind, ensuring that once installed, the pin provides the stable reference point needed to bring front-end geometry back to factory specification or better.
Whether you're a professional shop technician performing a suspension refresh or a serious DIYer tackling a full front-end rebuild, Moog's alignment cam guide pins represent the kind of engineered solution the chassis industry has trusted for generations. Browse the full selection of Moog Chassis Parts or explore all Alignment Cam Guide Pin options to find the right fit for your vehicle.