Howe Racing Coil Helper Spring
Howe Racing Enterprises Coil Helper Springs: Precision Tuning from the Track
When it comes to fine-tuning suspension behavior on a circle track race car, few adjustments offer as much bang for the buck as a well-chosen coil helper spring. Howe Racing Enterprises — a racing products company founded in 1971, specializing in chassis, steering components, and suspension components — brings that same race-day engineering discipline to their line of coil helper springs. These aren't afterthought accessories; they're purpose-built tuning tools developed by a brand that lives and breathes short-track competition.
What Are Coil Helper Springs and Why Do They Matter?
A coil helper spring (also called a spring rubber or coilover spring rubber) sits inside or alongside your primary coil spring to temporarily increase the effective spring rate at low suspension travel — or to fine-tune preload — without swapping out the main spring entirely. For circle track racers managing tight setup windows, the ability to make incremental rate changes quickly between practice sessions can be the difference between fighting the car and putting it in victory lane.
Howe Racing Enterprises has its own test oval to make sure every component performs as promised, which means their coil helper springs aren't just engineered on paper — they're validated under real racing conditions before they reach your car.
Howe's Coil Helper Spring Lineup
Howe Racing offers coil helper springs — marketed as "Conv Spring Helpers" and "Spring Rubbers" — in a range of rates and fitments designed to cover the most common racing coil spring diameters. They fit 2.5" diameter springs for quick, precise spring rate changes, and are made in soft, medium, and hard rate polyurethane that outlasts rubber 4 to 1. Additionally, Howe offers helpers sized for 5 to 5-1/2" springs in a 1-1/4" height configuration, covering both conventional and coilover suspension setups.
One of the standout technical features of Howe's polyurethane spring rubbers is their thermal stability. These spring rubbers are made from a special polyurethane that outlasts rubber 4 to 1, maintaining 95% of their rate at 180 degrees, and are available in soft, medium, and hard rates that are proportionate to the spring rate. This consistency under heat is critical during long race stints when underhood temperatures climb and other materials can soften and lose their tune.
- SA4310 — Coilover Spring Helper, Soft (Red), for 2.5" springs
- SA4915 — Coilover Spring Helper, Medium (White), for 2.5" springs
- SA5720 — Coilover Spring Helper, Hard (Blue), for 2.5" springs
- SA1310 — Spring Rubber, Soft, for 5 to 5-1/2" springs
- SA1620 — Spring Helper, Hard, for 5 to 5-1/2" springs
Why Trust Howe for Your Suspension Tuning?
Since the company's establishment in 1971 by legendary Mid-West racer Ed Howe, its seasoned engineers have endeavored to create and manufacture top-of-the-line chassis and components — starting in a small garage near Beaverton, Michigan, and growing over the years to bring an innumerable quantity of cutting-edge products to the racing market. That pedigree matters when you're selecting something as detail-oriented as a helper spring: you want a manufacturer who understands how every ounce of suspension compliance affects lap times.
Since 1971, Howe built on real-world racing experience to develop a diverse selection of parts including chassis, drivetrain, suspension, and engine components — all specifically designed and optimized for racing. Their coil helper springs are a natural extension of that philosophy: simple in concept, but engineered with the tolerances and material quality that serious racers demand. Browse the full selection of coil helper springs or explore everything Howe Racing Enterprises has to offer.