Johnson Controls VA9905-KGA-2 Six-Way Valve Actuator 5 Nm 24 VAC 2-10 VDC

The Johnson Controls VA9905-KGA-2 is an electric, non-spring-return rotary actuator, also called a six-way valve actuator or multi-input signal actuator. It mounts directly on VG1600 Series 270° six-way ball valves. It controls hot and chilled water flow in commercial HVAC systems. It can stand in for four regular through valves, or for two through valves plus one change-over valve.

Key Features:

• 5 Nm output
• 24 VAC power, with a 2 to 10 VDC or 4 to 20 mA input signal for proportional control. The 4 to 20 mA input needs a field-furnished 500 ohm, 1/4 W resistor.
• 24 VAC dual-wire on/off control is also supported
• Microprocessor-controlled brushless DC motor
• Eight-position DIP switch for field mode configuration
• Plastic posts and tabs line up with the valve flange and stem notch, which simplifies mounting
• Position indicator handle with manual override
• Plenum-rated cable (UL 444 Type CMP), 120 in. long, with ferrule ends
• NEMA 5, IP54 housing
• Operating range of 32°F to 140°F (0°C to 60°C), 90% RH non-condensing
• UL, CE Mark and RCM compliance

This actuator is designed for use with VG1600 Series six-way ball valves.