Falcon Shocks 99-99-08-200-003 Rear Bump Stop Kit, Snap-In Foam Bumpstop with Mount

The Falcon Shocks 99-99-08-200-003 rear bump stops (also called bumpstops or jounce bumpers) replace the factory rear leaf spring bump stops. They help cushion the axle at the end of suspension travel. Falcon Shocks is the performance suspension line from TeraFlex.

Key Features:

• Snap-in foam bump stop, part number 45-02-02-002, 3.90" tall
• Leaf spring bump stop mount, part number 45-03-01-005, for the foam snap-in bump stop assembly
• Designed for the rear leaf spring axle
• Foam bump stop presses into the mount, and the assembly installs in place of the factory bump stop

Installation Notes:

• Loosen the rear axle leaf spring U-bolts and remove the factory bump stops
• Press the Falcon bump stops into the mounts. A small amount of silicone spray lube around the base of the bump stop helps if it is hard to seat
• Tighten the U-bolts evenly and torque the nuts to factory specifications
• Re-check torque after the first 400-500 miles
• Tools needed: 19mm deep socket, 1/2" drive ratchet and a general mechanic's tool set

This upgrade is a simple bolt-on way to refresh the rear bump stop setup and help reduce harsh bottoming out.