Browning SH 1 Q-D Bushing 1" Bore SH Series Split Taper Bushing

The Browning SH 1 Q-D bushing (also called a quick-disconnect or QD taper bushing) is an SH-type bushing with a 1" finished bore. It mounts Browning sheaves, pulleys and sprockets on a shaft. The split-taper design gives a secure, concentric fit, and the bushing is easy to install and remove.

Key Features:

• Bushing type: SH, inch bore, 1" bore size
• Keyway: 1/4" x 1/8"
• Reverse mounting ability: the bushing can be mounted from either side of the hub for a more flush fit
• 3/4" per foot taper on the barrel for a self-locking mechanical grip
• Ductile iron construction
• Torque capacity: 3,500 in-lb
• Outside diameter: 2.6875"
• Total length and length through bore: 1.2"
• Flange thickness: 0.45"
• Barrel diameter: 1.871"; barrel length: 0.75"
• Three 1/4-20 x 1 3/8" cap screws on a 2.25" bolt circle
• Wrench torque: 9 ft-lbs

This bushing suits general power transmission and belt drive applications. It gives dependable shaft mounting with less vibration.