Interlux Paint Trilux 33 Antifouling Bottom Paint

Interlux Trilux 33 is an ablative antifouling bottom paint made for aluminum boats, outdrives and outboards. It also works on fiberglass, wood, steel and other underwater metals. It is a copper-free boat bottom paint. Instead of cuprous oxide, it uses cuprous thiocyanate, so it can be used on aluminum hulls without the galvanic corrosion risk of copper-based paints. Bare metal must be properly primed first.

Key Features:

• Dual-biocide formula with Biolux slime-blocking technology to control hard fouling, slime and algae
• Hard, slow-polishing ablative film gives multi-season protection and suits fast, frequently used powerboats
• Slow erosion helps limit paint build-up as more coats are applied
• Bright, clean colors that hold up over time
• For use below the waterline in fresh, salt and brackish water, on hulls, outdrives and other underwater parts
• Applies by brush or solvent-resistant roller. Spray application is for professional applicators only.
• Can be thinned with Interlux 216 Special Thinner

Application Notes: Apply at least two coats. Bare wood needs three, with the first coat thinned. Do not apply directly to bare aluminum. Sand the metal, then apply the Interlux primer system as the manufacturer directs. Check the Interlux compatibility guidance before overcoating existing antifouling paints.

Trilux 33 is a proven choice for protecting boats from marine growth in moderate fouling conditions.