SPC Performance Ford Sleeve Alignment Caster / Camber Bushing

SPC Performance Ford sleeve alignment caster / camber bushings are adjustable front upper control arm sleeves. They let you correct caster, camber, or both on many Ford trucks and SUVs, including lifted or lowered applications that have moved out of factory alignment specs. Each sleeve replaces the stock upper ball joint bushing. You can fine-tune the alignment without replacing major suspension components.

Key Features:

• Adjusts caster, camber, or both at the same time
• Rotating the sleeve splits the correction between camber and caster
• Replaces the factory sleeve at the front upper ball joint
• Steel construction with a corrosion-resistant zinc coating on standard sleeves
• Available in a range of correction angles to suit different alignment needs
• Fixed-angle designs make correction simple, with no need to re-adjust at each service

Installation Notes:

• Loosen and remove the upper ball joint pinch bolt, and remove the top snap ring if one is present
• Use an SPC sleeve puller to remove the existing sleeve
• Install an SPC zero-degree sleeve first and make a caster sweep to measure the correction needed. This saves time during alignment.
• Install the sleeve with the correct degree, then reinstall the snap ring if one was used and tighten the pinch bolt

SPC Performance is a respected name in alignment, and these sleeves are a dependable way to bring a vehicle back into alignment.