Hydrolevel Water Feeder for Steam Boilers with Digital Counter

The Hydrolevel VXT water feeder is a programmable automatic boiler water feeder for steam boilers. It keeps the water at a safe level and adds make-up water when the low water cut-off (LWCO) calls for it. A built-in digital feed counter records how much water goes into the system. That record helps you spot leaks and other water loss early.

Key Features:

• Universal compatibility: works with probe-type and float-type low water cut-offs.
• Programmable feed delay: after a feed signal from the LWCO, the feeder waits from 30 seconds to 10 minutes. This lets condensate return to the boiler and helps prevent flooding.
• Programmable feed amount: you can feed up to the LWCO level, or set 1 to 5 gallons to bring the water above the cut-off to the normal operating level.
• Digital feed counter: tracks all water fed into the boiler, including water added with the manual feed button.
• Manual feed button: adds water on demand.
• Underfeed protection: if one cycle does not add enough water, the feeder delays boiler operation and runs another feed cycle.
• Lock-out flood protection: helps prevent overfilling if the burner does not restart after feed attempts.
• Made in the USA by Hydrolevel.

Hydrolevel is known for boiler controls such as the HydroStat, the CycleGard low water cut-off and the Safgard LWCO line. The VXT feeder saves you trips to the boiler room to add water by hand. It also gives you feed-volume data for diagnosing water loss. It is offered in line-voltage and low-voltage versions to suit different boiler control setups.