Camburg Engineering CAM-210004 Race Series 2.0 Front Hub Upgrade Kit 14mm Studs

The Camburg Engineering CAM-210004 Race Series 2.0 Front Hub Upgrade Kit is a direct bolt-on replacement for the factory Chevrolet/GMC 1500 2WD front hub units. Factory front hub assemblies on these trucks are well-known for premature bearing failure, and this kit was purpose-built to eliminate those issues with a race-proven, heavy-duty design suitable for both street driving and competitive use.

The 2.0 lightweight hub body is CNC machined in-house from 6061-T6 aluminum and finished with a matte black anodized coating for corrosion resistance and durability. Camburg uses larger 7-inch round stock material for the hub body to maximize strength around the wheel stud area. The wide bearing spread design significantly increases load capacity and extends service life compared to the stock hub unit.

This kit includes 14mm wheel studs machined from 4340 chromoly steel, then heat-treated, stress-relieved, and black-oxide coated for maximum strength. The bolt-on 2-inch spindle snouts are machined from 4140 heat-treated steel and are designed to work with stock and Camburg spindles.

Kit Includes:

• CNC-machined 6061-T6 aluminum hub bodies (matte black anodized)
• 14mm x 1.5 chromoly wheel studs (4340 heat-treated, black-oxide coated)
• Timken bearings and races
• SKF seals
• 2" 4140 heat-treated bolt-on spindle snouts
• Bearing preload spacers
• Lock nuts and all necessary hardware

Key Features:

• Direct bolt-on replacement — no brake caliper or spindle modification required
• Wide bearing spread for increased strength and longevity
• Compatible with stock brake calipers and rotors
• Suitable for street and race applications
• No ABS sensor provision

Installation Notes: OEM rotors must have the center-bore machined to 4.25" and chamfered on the backside of the ID. Bearing preload spacers require final machining during assembly. Check M14 spindle snout hardware clearance during tightening — snouts may need to be shortened when used with stock or third-party spindles. Wheels must have a 4.25" center-bore.