Feuling Motor Company 7097 Race Series Oiling System Kit for Milwaukee Eight

The Feuling Motor Company 7097 Race Series Oiling System Kit is a complete high-performance oiling solution designed specifically for 2017-2019 Harley-Davidson Milwaukee Eight oil-cooled engines. This comprehensive kit combines all necessary components to upgrade your engine's oiling system, delivering significant improvements in oil pressure, volume, and scavenging efficiency over stock systems.

Performance Benefits:

• 27% more pressure and scavenge gear volume compared to stock
• 42% more scavenge volume through optimized port sizing and matched passages
• 68% more oil volume to crankshaft and connecting rod bearings
• 10-30 PSI increase in oil pressure
• 15-25 degree cooler engine operating temperatures
• 15-30 degree cooler oil temperatures
• Reduces wet sumping, blow-by, and oily air cleaners
• Test results show 2 HP gain and 2 ft-lbs of torque increase at the rear wheel
• Up to 50% reduction in engine sump oil level
• Quieter and smoother engine operation

Race Series Components:

• Billet 7075 hard anodized oil pump - 50% harder and stronger than factory pumps, maintains tighter tolerances under temperature
• Race Series short travel hydraulic lifters with .115" total travel - slower bleed-down rate handles heavy valve spring pressures, increases RPM capability before valve float
• High-flow billet camplate made from 7075 aluminum - 50% harder and stronger than factory camplates
• Complete cam installation kit with cam bearing, cam/crank bolts and washers
• Engine and fastener assembly lube included

Technical Features:

• Enlarged oil pump reservoirs and critical oil passages for maximum flow
• Matched oil port holes throughout camplate align with engine case ports
• Increased oil flow to lifters, piston cooling jets, crankshaft and rod bearings
• Deeper scavenge kidneys compared to HP+ series for increased scavenge volume
• Bench-tested oil pumps with relief valve seated and sealed to minimum 30 PSI, full pop-off at 55-60 PSI
• O-ring seal groove added to oil pump back cover for enhanced sealing
• Increased roller clearance for steep ramped camshafts and Milwaukee Eight exhaust lobe flange clearance

This Race Series kit eliminates common pressure and scavenge issues associated with factory oiling systems. The combination of precision-machined components and optimized oil flow paths ensures superior engine protection and performance. Made in the USA with premium materials and rigorous quality control standards.

Note: Feuling recommends running oil level at 90-99% full when hot. Optional Feuling X ARP bolt kit (Part #8022) available separately for enhanced fastener security.