Lochinvar 100109962 Blower Prover Switch Boiler Safety Controls & Aquastats - Kit
Daikin-McQuay 018482800 Heating/Cooling Auto Changeover Unit-Mounted Thermostat
Johnson Controls VA-7153-1001 Electric Valve Actuator 90 lb-in with 2K Ohm Feedback
Johnson Controls VA-6100-HGC Electric Valve Actuator 24VAC Proportional for 4-6" Valves
Johnson Controls VA9208-BGC-3 Electric Spring-Return Actuator 24VAC 2 SPDT
Johnson Controls VA7810-HGA-2 Electric Valve Actuator 24VAC Non-Spring Return Proportional Control
Johnson Controls V248GD1-001C Penn V248 Series Three-Way Water Regulating Valve 1 in NPT 200-400 PSI
Johnson Controls V246GC1-001C 3/4" NPT High Pressure Water Regulating Valve
Johnson Controls T-4000-630 Universal Conversion Kit for Pneumatic Room Instruments
Johnson Controls TEC3623-14-000 BACnet MS/TP or N2 Networked Thermostat Controller with Occupancy Sensor
Johnson Controls TEC3330-14-000 Stand-Alone Thermostat Controller for RTU/Heat Pump with Economizer White
Johnson Controls T-4756-205 Pneumatic Dual Temperature Thermostat 55-85°F Horizontal Mount
Siemens Building Technology 192-204 Room Thermostat Day/Night Setpoint 45-85°F
Siemens 267-03079 2-Way Normally Closed Stainless Steel Valve 1.5 Inch 25 CV
Siemens Building Technology 243-0019 Pneumatic Pressure Signal Selector Relay 6 Input
Siemens Building Technology 241-00230 3-Way Zone Valve Assembly 1/2" NPT 120V
Siemens Building Technology 240-00230 1/2" NPT 3-Way Electric Valve 120V CV 1.0
Siemens Building Technology 240-00214 1/2" NPT Normally Closed Zone Valve 120V 4.0 CV
Siemens 194-2043 Powerstar Retroline Pneumatic Thermostat Chassis Day/Night Direct Acting
Siemens Building Technology 259-02030 Valve Assembly Normally Open 1/2-Inch 0.4 Cv Brass Trim
Siemens 257-02038 1/2" NPT 2-Way Normally Open Pneumatic Control Valve with Actuator
Siemens Building Technology 254-01108 2-Way Valve Assembly 1/2" NC 2.5 Cv with SSB81U Actuator
Belimo B350+ARX24-MFT95 Characterized Control Valve NPT Cv - 3-Way 2 57 24V
Belimo G220S-J 2-Way Globe Valve 3/4" NPT Stainless Steel Trim Cv 5.5 ANSI Class 250
Why Thermostats, Controls & Valves Are Essential to Your Vehicle
Few systems in your vehicle are as quietly important as the network of thermostats, controls, and valves that govern engine temperature. Acting as the gatekeeper for your car's cooling system, these components make split-second decisions about coolant flow that can mean the difference between optimal performance and catastrophic engine failure. Understanding what they do — and why they matter — is the first step to keeping your vehicle running reliably for years to come.
How Engine Thermostats Work
A thermostat is a key component of the engine's cooling system that regulates coolant flow based on engine temperature. It remains closed when the engine is cold, allowing it to warm up quickly, and opens as the engine reaches optimal operating temperature to let coolant circulate to the radiator. This seemingly simple action has profound effects on engine health and efficiency.
During normal use, the thermostat is never in the fully closed or fully open position — it depends on the condition of the engine and gradually nears either state to control coolant flow. Most thermostats open at 180–195°F and use a wax-filled mechanism that expands with heat to operate. This purely mechanical response is remarkably reliable, though modern vehicles increasingly use electronically controlled variants for even greater precision.
The Broader Category: Controls & Valves
The thermostat is just one piece of a larger puzzle. The Thermostats, Controls & Valves category encompasses a wide range of components that regulate fluid flow, temperature, and pressure throughout your vehicle's systems. These include:
- Coolant control valves — designed to control the distribution and flow of coolant, managing heat transfer between the engine, radiator, and heater core.
- Bypass thermostats — direct coolant flow through a bypass when the engine is cold and redirect it to the radiator once warmed up.
- Electronic and map-controlled thermostats — used in advanced cooling systems to maintain optimized cooling based on changing driving conditions, offering a significant improvement in accuracy over purely mechanical types.
- Temperature sensors and switches — monitoring components that feed data to the engine control unit, enabling intelligent management of cooling and heating circuits.
- Heater control valves — regulate how much hot coolant flows into the cabin heater core, directly affecting interior comfort and defrost performance.
Why These Parts Matter for Performance and Longevity
Maintaining proper engine temperature improves fuel efficiency, reduces engine wear caused by temperature fluctuations, and supports emission control by ensuring consistent combustion temperature. Conversely, common failure modes include a thermostat getting stuck open — causing poor heating — or stuck closed, which causes overheating. Either condition places unnecessary stress on the entire cooling system and can lead to costly repairs.
The main engine coolant is often used to cool one or more additional heat exchangers or radiators, such as a transmission oil cooler, a fuel cooler, or an air-charge cooler, making this category relevant well beyond just the primary engine cooling circuit.
What to Consider When Shopping This Category
When selecting a thermostat, control, or valve, always match the component's temperature rating to your vehicle manufacturer's specification. Thermostats are designed to meet manufacturer's specifications for temperature ratings, which is critical for optimal engine performance. Also consider whether your application calls for a conventional mechanical unit or a more advanced electronically controlled design, especially in late-model vehicles with precision thermal management systems. Finally, plan to replace your thermostat every 100,000 miles or when you notice temperature regulation problems to stay ahead of potential failures.