Zone Offroad D36F 8-Inch Suspension Lift Kit with Fox 2.0 Adventure Shocks

The Zone Offroad D36F is an 8-inch suspension lift kit engineered for 2009–2013 Dodge Ram 2500 4WD Diesel trucks. This performance-packed system is designed to provide maximum ground clearance and the wheel well space needed to run up to 37-inch tires, while maintaining solid on-road ride quality and off-road capability.

At the heart of this lift system is a unique control arm relocation design that relocates both the stock upper and lower control arms to relieve suspension geometry angles, properly position the front axle, and deliver correct caster and front pinion angle settings. The front lift is achieved through full-length coil springs, while the rear uses cast lift blocks — no frame or axle cutting required.

Key Features:

• 8 inches of total suspension lift height
• Front lift via full-length replacement coil springs
• Rear lift via cast lift blocks
• 1/4-inch steel control arm relocation brackets mount to stock locations
• Upper and lower control arm relocation corrects suspension geometry
• Dropped pitman arm included for steering angle correction
• Track bar relocation bracket maintains proper axle centering
• Sway bar relocation hardware included
• Extended bump stops included
• Fox 2.0 Adventure Series shocks front and rear for premium damping performance
• Stock alignment adjustability retained
• No cutting of frame or axle mounts required

The Fox 2.0 Adventure Series shocks provide a significant upgrade over factory dampers, delivering improved on-road comfort and predictable off-road handling across a wide range of terrain. Fox's monotube design uses an internal floating piston (IFP) to separate shock oil from the high-pressure nitrogen charge, resisting fade during extended off-road use.

All Zone Offroad suspension systems are built in the USA and backed by a lifetime warranty. Each kit includes a complete hardware package and detailed installation instructions.