Carrillo SCR5462-6 Pro-H Beam Connecting Rod Set Porsche 3.2/3.3 5.000" WMC Bolt

With a precision 5.000" center-to-center length, 22mm fully floating bushed wrist pin, and 3/8" WMC (H11 Tool Steel) rod bolts, these rods are a proven performance upgrade for high-output Porsche builds.

Key Features:

• Pro-H Beam Design – Straight H-beam geometry for maximum strength with reduced weight
• 5.000" Center-to-Center Length – Precision-matched to Porsche 3.2/3.3 engine specifications
• 22mm Wrist Pin – Bushed full-floating pin end for reduced friction and improved durability
• 3/8" WMC Rod Bolt – H11 tool steel fastener with 220,000 PSI ultimate tensile strength
• Proprietary Carrilloy Steel – Chrome, nickel, moly, vanadium alloy meeting VAR (vacuum arc re-melt) ASTM standards
• Oversized Forging – Ensures proper grain flow and removal of surface inclusions
• Multi-Stage Inspection – Each rod is magnafluxed twice and Rockwell tested to validate heat treat
• Shot Peened Finish – Relieves tensile stress and increases fatigue life
• Advertised Weight: 571g per rod

CP-Carrillo connecting rods are manufactured in Irvine, California and are trusted by top Porsche engine builders worldwide for performance street and track applications. Upgrading to Carrillo rods is strongly recommended for engines that will exceed 7,400 RPM, produce over 400 horsepower, or see sustained track use. The SCR5462-6 with WMC bolts is the ideal choice for builds up to approximately 8,500 RPM — for higher-rev applications, consider the CARR bolt variant (SCR5463-6) with its 285,000 PSI MP35N fasteners.