Eastwood 59911ZP Shield Black Bedliner Kit 850 - 2K Urethane Spray-In Coating with Kevlar

The Shield Black Bedliner Kit #850 by TCI Products is a professional-grade, two-component (2K) protective urethane spray-in bedliner coating engineered for superior toughness and durability. Formulated with the highest-quality resins and infused with Kevlar pulp, Shield delivers unmatched impact resistance, enhanced gloss, and a consistent texture across a wide range of surfaces. Each kit covers approximately 130 square feet and is ideal for truck beds, automotive panels, marine applications, recreational equipment, and industrial or agricultural use.

What's Included (Per Kit):

• (4) 750ml cans of Black Bedliner
• (4) 250ml cans of Hardener/Activator
• Coverage: approximately 130 sq ft per kit

Key Features:

• 2K (two-component) urethane formula for maximum hardness and adhesion
• Infused with Kevlar pulp for exceptional strength and durability
• Pre-measured activator cans eliminate guesswork — mix ratio is 3:1 by volume
• Adjustable texture: vary spray distance and air pressure for coarser or smoother finish
• 50-state compliant formula
• Compatible with a wide range of substrates

Compatible Substrates:

• Steel, aluminum, galvanized metal
• Fiberglass, SMC, OEM paint
• Wood, cured concrete, epoxy primer, filler/putty

Application Instructions:

• Remove all loose material and rust; clean surface with soap, water, and/or degreaser
• Sand with 120–180 grit or nylon cup brush; re-clean with wax and grease remover
• Prime bare metal, aluminum, and galvanized surfaces with 1K Etch Primer or Epoxy Primer
• Apply adhesion promoter to fiberglass and plastic surfaces
• Mix one can of activator into one can of bedliner; shake vigorously for 3 minutes
• Spray at 30–65 PSI using a #200E Schutz-style spray gun with disposable tips (#BLT201E)
• Optimal temperature range: 60°–70°F; avoid application below 40°F or above 90°F

Dry Film Thickness Per Coat:

• 1 Coat: 9 mil
• 2 Coats: 15 mil (recommended)
• 3 Coats: 20 mil (maximum)

Dry Times:

• Air dry: 3–5 hours
• Force dry at 120°F: approximately 30 minutes
• Allow minimum 2 hours before sunlight exposure; 24 hours before water exposure

Two coats of Shield are recommended for optimal protection. The Shield #200E spray gun (sold separately, part #BLG200E) and disposable tip pack (#BLT201E) are required for application.