Power Steering Pressure Control Solenoid
ACDelco 19435020 Steering Gear Valve Solenoid Automatic Transmission Speed Sensor
What Is a Power Steering Pressure Control Solenoid?
The power steering pressure control solenoid — often called an Electronic Variable Orifice (EVO) valve — is a small but critical component in vehicles equipped with speed-sensitive or variable-assist hydraulic power steering. Its job is to modulate the hydraulic pressure delivered to the steering gear based on driving conditions, so the steering feels light and effortless at low speeds while remaining firm and responsive at highway speeds.
The EVO valve is mounted at the power steering pump outlet and uses an electronic controller to produce magnetic field changes in its solenoid coil. The valve pin attached to the orifice valve extends into the solenoid coil, and the magnetic field generated by the solenoid coil pulls the pin into the coil — effectively opening or closing the orifice to regulate flow.
During parking maneuvers, when there is no vehicle speed input, the orifice control valve has no magnetic field and provides high pump flow for low steering effort. At highway speeds, the orifice control valve magnetic field is increased to reduce the flow in proportion to vehicle speed, achieving higher steering effort and reducing input sensitivity to the steering wheel.
Why Does the Solenoid Matter?
A properly functioning pressure control solenoid is the bridge between raw hydraulic power and intelligent, speed-responsive steering feel. When the solenoid fails, the only indication of trouble might be a loss of road feel and/or increased steering sensitivity at highway speeds. In a worst-case scenario, if the actuator or solenoid valve fails in the open position, it could cause a noticeable reduction or loss of power assist.
The good news is that there is no need to replace the whole rack if only the EVO solenoid valve is defective. In many applications, the solenoid can be swapped independently, making it a cost-effective repair that restores proper steering behavior without a full rack-and-pinion replacement.
What to Look for When Replacing a Pressure Control Solenoid
- Vehicle-specific fitment: Solenoids vary significantly by make, model, and year. Always confirm compatibility before ordering.
- OEM vs. aftermarket: OE-spec solenoids ensure proper resistance values and correct hydraulic calibration for your vehicle's control module.
- Connector and thread integrity: Inspect the electrical connector and mounting threads during replacement to avoid fluid leaks or signal errors post-installation.
- Diagnostic confirmation: Use a scan tool to confirm the solenoid — not the pump or rack — is the root cause before replacing it.
Borgeson: A Trusted Name in Steering Components
Borgeson has been manufacturing steering universal joints for the industrial, automotive, military, and aerospace industries since 1914, and continues to develop and refine its original needle bearing U-joint into the finest and strongest steering hardware available. Borgeson Universal Co. Inc. is the leading manufacturer and supplier of aftermarket steering components for street rods, racing, specialty automotive, OEM, and pickup trucks. Their comprehensive catalog — which includes power steering boxes, pumps, hoses, conversion kits, and pressure control components — makes them a go-to source for enthusiasts and professional technicians alike. Browse Borgeson Power Steering Pressure Control Solenoids to find the right part for your application.