Rexco PF10-G PARTALL Film #10 Green PVA Mold Release 1 Gallon

Rexco PARTALL Film #10 is a professional-grade polyvinyl alcohol (PVA) mold release agent designed for composite manufacturing and fiberglass fabrication. This water and alcohol-based coating creates a solvent-resistant barrier between parts and mold surfaces, making it ideal for new, reconditioned, or reactive molds.

Key Features:

• Water-soluble PVA formula resistant to solvents, styrene, polyester, and vinylester resins
• Compatible with polyester, vinylester, epoxy, and urethane resin systems
• Dries to a clear, non-shrinking film that won't pull away from corners or curved surfaces
• Can be applied by spray gun, brush, roller, sponge, or cloth for versatile application
• Covers approximately 400-500 square feet per gallon
• Ready to use as received - no dilution required
• Easily removed with water from molded parts and spray equipment

Application:

• Apply mist coat followed by 1-2 flow coats on seasoned molds, or multiple coats on new molds
• Drying time: 15-45 minutes per coat depending on conditions
• Recommended dry film thickness: 2-4 mils on new molds, 1-2 mils on seasoned molds
• For spray application: Use HVLP spray gun at 22-24 PSI
• Commonly applied over mold release wax for optimal results

This green-tinted version provides visual confirmation of complete coverage during application. PARTALL Film #10 can also serve as a surface cure agent for gel coat repairs by sealing out moisture that inhibits resin cure. Not recommended for use with phenolic resins or automotive finishes.