The Fenwal Controls 12-F27121-000-06 Detect-A-Fire is a rate-compensated thermal heat detector designed for professional fire protection systems. This vertical mount detector activates at 325°F (163°C) and features a brass head construction with normally open contacts that close on temperature rise.
Rate Compensation Technology:
Unlike standard fixed temperature or rate-of-rise detectors, this Detect-A-Fire unit combines the best features of both technologies. The outer shell is made of a rapidly expanding alloy that closely follows changes in surrounding air temperature, while inner struts use a slower expanding alloy sealed inside. This design accurately senses ambient air temperature regardless of fire growth rate, virtually eliminating false alarms from transient warm air rushes up to 40°F per minute while responding quickly to actual fire conditions.
Key Specifications:
- Activation temperature: 325°F (163°C)
- Contact configuration: Normally open, close on temperature rise
- Contact rating: 5 amps at 125 VAC, 0.5 amps at 125 VDC
- Mounting: Vertical mount via 1/2-14 NPT thread
- Lead wires: 6-inch leads (4-wire configuration for circuit supervision)
- Construction: Brass head with hermetically sealed design
Certifications and Approvals:
This detector is UL Listed, FM Approved, ULC certified, and CE Listed. It is rated for use in hazardous locations including Class I Groups A, B, C, and D; and Class II Groups E, F, and G. The device meets IEC 60947-1 and IEC 60947-5-1 standards with rated insulation and impulse voltages of 1500 VAC.
Applications:
Ideal for fire detection and release systems in commercial buildings, industrial facilities, paint spray booths, range hoods, engine compartments, power generation facilities, and other environments requiring reliable overheat detection. Can be used as an alarm device to alert personnel or as a release device to actuate fire suppression systems using clean agents, CO2, water, or dry chemical extinguishants.
The detector mounts to standard junction boxes with 7/8-inch diameter openings and can be wired in or out of conduit depending on local codes. While designed for vertical mounting, Detect-A-Fire units are not position-sensitive and can be mounted horizontally or vertically as required by the application.