Grundfos 012DC201 Unilift KP250 Stainless Steel Submersible Drainage Pump 1/3 HP 115V

The Grundfos 012DC201 Unilift KP250-M-1 is a professional-grade stainless steel submersible drainage pump designed for pumping non-aggressive water and grey wastewater. This pump handles drainage and domestic effluents with particles up to 10 mm (approximately 0.4 inches), making it ideal for emergency dewatering of flooded basements, sump applications, and general utility pumping tasks.

Key Performance Specifications:

• Maximum flow rate of 65 GPM with 32-foot maximum head
• 1/3 HP motor with 115V single-phase power
• 1.25-inch NPT discharge connection
• 25-foot power cord for flexible installation
• Manual operation without float switch
• Rated current of 4.9 amps

Construction and Features:

• Premium stainless steel construction for extended pump life
• Semi-open stainless steel impeller design
• Liquid-cooled canned rotor motor with automatic thermal protection and restart system
• Double shaft seal with two lip seals and grease in-between
• Maintenance-free carbon bearings cooled by pumped liquid
• Outer casing ensures continuous motor cooling
• Motor filled with non-toxic motor liquid
• Equipped with suction strainer and carrying handle

Technical Data:

• Power input: 480W
• Operating speed: 3286 RPM
• Starting current: 14.5 amps
• Capacitor: 20 µF/250V run capacitor
• Enclosure rating: IP68
• Insulation class: F
• Liquid temperature range: 32°F to 122°F
• Maximum installation depth: 32.8 feet

The pump can be used as a portable unit or for stationary installation inside and outside buildings. Suitable for pumping groundwater, surface water, rainwater, and similar liquids. UL Listed and CSA approved.