Erie By Schneider Electric VT2343G13A01A0F 3/4" 2-Way Zone Valve Assembly 24V Normally Closed with End Switch

The Erie By Schneider Electric VT2343G13A01A0F is a complete PopTop Series zone valve assembly designed for residential and commercial HVAC hydronic heating and cooling applications. This ready-to-install unit combines a 3/4-inch valve body with an integrated AG13A01A0F electric actuator for reliable, maintenance-free operation.

Valve Body Specifications (VT2343):

• Size: 3/4 inch inverted flare connection (retrofit style)
• Configuration: 2-way zone valve
• Flow coefficient: 3.5 Cv
• Close-off pressure: 25 PSI
• Construction: Forged brass body with nickel-plated stem and brass seat
• Paddle material: Buna N rubber
• System static pressure rating: 300 PSI maximum
• ANSI Class IV seat leakage (0.01%)

Actuator Specifications (AG13A01A0F):

• Voltage: 24 VAC at 50/60 Hz
• Operation: Normally closed (N/C), 2-position spring return
• Power consumption: 6.5 watts, 7.5 VA
• Drive mechanism: Hysteresis synchronous motor with spring return
• Timing: 25 seconds maximum travel (60 Hz)
• Wiring: Terminal block connections
• End switch: Built-in SPDT auxiliary switch (24-240 VAC, 101 mA min to 5A max)
• Manual override: Lever for manual open position
• Enclosure: NEMA 1 rated with stainless steel base plate and aluminum cover

Key Features:

• Tool-free actuator removal and replacement without valve disassembly
• PopTop design allows actuator installation after valve body is piped in place
• Mounts directly to valve body without linkages or calibration
• Spring return provides fail-safe operation when power is removed
• Suitable for hot water, chilled water, and up to 50% ethylene glycol solutions
• Temperature range: 32°F to 200°F fluid and ambient
• Designed for cycling applications in zone control systems

The inverted flare connection style makes this valve ideal for retrofit applications where quick installation is needed. The built-in end switch enables zone pump or burner control interface. Perfect for fan coils, baseboards, air handlers, and other hydronic zone control applications.