Fireye EP382 Programmer Module 0 Second Purge 5/10 Second TFI Recycle No Modulation

The Fireye EP382 is a specialized programmer module designed for use with the Flame-Monitor Burner Management Control System (E100 and E110 models). This module features 0 second purge timing with 5 and 10 second trial-for-ignition (TFI) periods, 4 second flame failure response time (FFRT), recycle operation capability, and operates without modulation control.

Key Features:

• Zero second purge timing for rapid startup applications
• Dual trial-for-ignition periods: 5 and 10 seconds for flexible ignition sequencing
• 4 second maximum flame failure response time for enhanced safety
• Recycle operation mode when running interlock circuit opens during firing cycle
• Six dipswitch configuration for operational characteristics including forced blower motor start delay and running interlock circuit requirements
• RJ45 connector for ED510 display module integration
• Two RJ12 connectors for Modbus communications capability
• Stores burner cycles, hours, and lockout history for maintenance tracking

The EP382 provides comprehensive start-up programming, safe-start check verification, and continuous flame monitoring supervision. It ensures proof of low fire position and fuel valve end-switch safety checks, automatically initiating safety lockout if circuits are open at improper points in the control cycle. The running interlock circuit continuously monitors limit switches, air flow switches, and fuel pressure switches throughout operation. This module does not include a modulator (firing rate motor) circuit.