Johnson Controls VG7243PT+7150G VG7000 1-1/4" 2-Way Stainless Steel Trim Globe Valve with Non-Spring Return Electric Actuator

The Johnson Controls VG7243PT+7150G is a factory-assembled combination of the Series VG7000 Model VG7243PT bronze-body, stainless steel trim globe valve and the VA-7150-1001 (7150G) non-spring return (NSR) electric actuator. This pre-matched valve and actuator assembly is designed to accurately regulate the flow of hot water, chilled water, or steam in commercial and industrial HVAC systems.

The VG7243PT valve features a 1-1/4" NPT end connection, a two-way push-down-to-close configuration, and an 18.5 Cv flow coefficient, making it well-suited for medium-capacity hydronic and steam applications. Stainless steel trim provides enhanced durability and corrosion resistance versus standard brass-trim models, and supports a steam pressure drop rating of up to 100 psid (690 kPa).

Key Features:

• Valve size: 1-1/4" NPT end connections (female threaded)
• Configuration: Two-way, push-down-to-close (normally open)
• Flow coefficient (Cv): 18.5
• Trim material: Stainless steel for improved durability and higher pressure drop capability
• Flow characteristic: Equal percentage for precise two-way control
• Rangeability: 25:1 per EN 60534-2-4
• Leakage rating: 0.05% of maximum flow (stainless trim, ANSI/FCI 70-2)
• Body pressure rating: ANSI Class 250
• Media temperature range: Water: 35°F to 248°F (2°C to 120°C); Steam: maximum 338°F (170°C) at 35 psig
• Maximum recommended pressure drop: 35 psid for water; 100 psid for steam (stainless trim)
• Actuator type: VA-7150-1001 three-wire, non-spring return (NSR) electric actuator
• Actuator voltage: 24 VAC, 50/60 Hz
• Factory or field assembly available

The VA-7150-1001 non-spring return actuator provides three-wire floating control, giving the valve the ability to hold its last position on power loss — ideal for applications where a defined fail position is not required. The complete assembly offers full actuator interchangeability, allowing for easy field retrofit or replacement using standardized mounting kits. ANSI Class 250 compliance ensures reliable performance across a wide range of building automation and building management system (BMS) applications.