King Shock Absorber
King RS4526-BP4H 4.5" Pure Race Bypass Shock 26" Travel 4 Tube Remote Reservoir
King Shocks 25111-006 Reservoir Cylinder Long Finned, 7 in., for 2.5 Performance Race Shocks
King Shocks 25311-014 Shock Absorber Cylinder — 2.5 Performance Race, 13.721 in.
King 25311-007 2.5 Performance Series Shock Cylinder Jeep JK Rear 4 Inch Lift
King 25504-012 2.5 Inch Race Series Replacement Shock Shaft .875 Diameter 12 Inch Travel
King 25701-B52 Replacement Shock Shaft 0.875" Diameter IBP 2.5" Performance Series
King Shocks 30013-004 Shock Absorber Reservoir Cylinder 3.0/3.5 RS 15 in. x 2.75 in. OD
King Shocks 30013-003 Shock Absorber Reservoir Cylinder 12.5 in. x 2.75 in. OD
King Shock Absorbers: Where the Podium Meets the Trail
When it comes to shock absorbers that bridge the gap between all-out desert racing and everyday driving, few names carry more weight than King Shocks. Founded in 1996 and rooted in off-road racing culture dating back to the early 1980s, King set out to solve a problem that no other manufacturer had adequately addressed: building a shock absorber that could survive the relentless punishment of professional-level competition while remaining practical for the street.
King's shock absorbers are not repurposed street products dressed up for the dirt. Every unit in their lineup begins life as a race design. King's racing division has custom-built and tuned shock absorbers for stock vehicles from Ford, General Motors, Jeep, Nissan, and Toyota — and those same race-proven designs flow directly into the products available for everyday drivers.
Product Lines Built for Every Level of Performance
King's shock absorber catalog covers a wide spectrum of applications and performance needs:
- OEM Performance Series: These bolt-on upgrade kits provide a direct-fit suspension solution for popular trucks and SUVs. Front coilover kits offer adjustable ride height and up to a 25% increase in wheel travel, while rear kits typically deliver a 15% travel increase — all with simple bolt-on installation using factory mounting locations.
- 2.5 IBP Internal Bypass Coilovers: King's IBP (Internal Bypass) coilover shock delivers precisely tunable velocity-sensitive and position-sensitive damping, along with an integrated hydraulic bump stop, all inside a monotube design that bolts directly to the vehicle.
- Bypass Shocks: Featuring external bypass tubes for precise position- and velocity-sensitive damping tuning, these shocks are the choice for serious pre-runner and desert race builds.
- 2.0, 2.5, and 3.0 Series: King's tiered body-diameter lineup means there is a shock for everything from a lifted daily driver to a Trophy Truck, with larger bodies providing dramatically more fluid capacity for sustained damping performance under extreme heat and load.
Engineering Details That Set King Apart
Every King shock absorber is manufactured at their Garden Grove, California facility from aircraft-quality billet alloy materials on precision equipment and hand-assembled by trained technicians. The 2.5" shock cylinders are precision-bored to within +/- .001" tolerance, then honed after cadmium plating to ensure a tight piston seal and optimal valving function. Large-diameter shafts are engineered to a minimum tensile strength of 100,000 PSI, and aluminum components are machined from 6061-T6 billet stock.
The external finned reservoirs found on King's performance and race-oriented shocks serve a critical function: they dramatically increase fluid capacity and heat dissipation, providing sustained damping performance even under the most punishing conditions. An optional compression adjuster — available in a 20-click wide-range format on 2.5 series shocks — lets drivers fine-tune their damping curve to match terrain and load without special tools.
Critically, every King shock absorber is fully rebuildable, serviceable, and tunable using simple hand tools. Owners can order a seal kit and return their shocks to factory-fresh condition themselves, or send them back to the factory for service — a long-term value proposition that sets King apart from many competitors.
Dynamometer-Tested, Race-Validated
King validates all of their damping curves on a state-of-the-art electromagnetic shock dyno capable of inducing shaft speeds up to 120 inches per second. That lab work is backed up by real-world testing in competition worldwide, where the shocks are exposed to forces that no laboratory can fully replicate. The result is a shock absorber that is factory-tuned for optimal ride quality right out of the box, whether you're crawling rocks, charging desert whoops, or commuting on the highway.