EVO Mfg EVO-3015DP 2.5 Inch High Clearance PLUS Long Arm Lift Kit for Jeep JL Diesel

The EVO Manufacturing EVO-3015DP 2.5" High Clearance PLUS Long Arm Lift Kit is engineered specifically for Jeep Wrangler JL 4-door diesel models, delivering exceptional ground clearance, optimal suspension geometry, and superior ride quality. This comprehensive long arm suspension system transforms your JL into a trail-ready machine capable of running up to 37" tires on Rubicon models or 35" tires on Sahara and Sport/S trims.

High Clearance Design:

• Front control arms mount tucked up inside nearly flush with the frame bottom, mounting inches above stock locations
• Rear long arm mounting locations positioned on the side of the frame, providing inches of clearance over factory positions
• Rear axle mounting raised multiple inches for maximum clearance
• Specifically designed bracketry optimizes suspension and chassis clearance while maintaining proper geometry

Premium Components:

• 2.5" Plush Ride Lift springs specific to each corner for level stance and compliant ride quality
• Long arms constructed from industry-leading 2.0" x .281" wall Steel DOM tubing for exceptional strength
• Johnny Joints on both ends of control arms for unrestricted articulation without wearable rubber bushings
• EVO1 on-vehicle adjusters allow control arm length adjustment while fully installed for easy alignment
• Front and rear adjustable track bars included (PLUS "P" designation)

Complete Kit Includes:

• High clearance long arm control arms with Johnny Joints
• Corner-specific 2.5" lift coil springs
• Front brake line extension brackets
• Rear sway bar end links
• Front and rear bump stop extensions
• Weld-on frame mounting brackets with alignment holes
• Front and rear adjustable track bars

Installation Notes: This kit requires cutting, grinding, and welding of frame brackets. Mounting brackets feature full-length hard-face mounting surfaces for redundant welding area and strength. Brackets align to the frame using existing factory holes for proper positioning. Designed to require no exhaust cutting on 3.6L JL models (minor grind/clearance to flange may be required). No driveshaft modifications required. Compatible with factory shocks using optional shock extensions, or use aftermarket 2.0"-2.5" lift shocks.

The 2.5" lift height is based on a 4-door Rubicon. Sport and Sahara models will see slightly higher increases and match Rubicon overall height. Wheel spacers or aftermarket wheels with reduced backspacing required. Minor inner liner trimming may be needed for full tire clearance under compression. Made in the USA by EVO Manufacturing.