Engine Valve Lash Cap
Supertech Performance LC-60-4.90B Valve Lash Cap Diameter Thick - 6mm 4.90mm
Supertech Performance LC-60-4.80B Valve Lash Cap Diameter Thick - 6mm 4.80mm
Supertech Performance LC-60-4.70B Valve Lash Cap Diameter Thick - 6mm 4.70mm
Supertech Performance LC-60-3.80B Valve Lash Cap Diameter Thick - 6mm 3.80mm
Supertech Performance LC-60-3.75B Valve Lash Cap Diameter Thick - 6mm 3.75mm
Supertech Performance LC-60-3.70B Valve Lash Cap Diameter Thick - 6mm 3.70mm
Supertech Performance LC-70-2.15 Valve Lash Cap 7.0mm x 3.0mm Deep x 2.15mm Thick
Resideo by Honeywell K06U1101 Union Kit for 3/4-Inch Sweat Pressure Regulating Valve
Spence Engineering FIT-E5-B3G1A1A 1.5" Type E5 Bends and Fittings Kit with Condensation Chamber
What Are Engine Valve Lash Caps?
Engine valve lash caps are small but critically important components that sit atop the valve stem tip, acting as a protective interface between the valve and the rocker arm. Valve lash — also called valve clearance — is the precisely controlled gap within the valve train that allows metal components to expand and contract across heat cycles without causing damage or holding a valve open at the wrong moment. Valve lash caps help maintain this clearance by providing a precise, adjustable interface between the valve stem and the rocker arm or camshaft follower.
Why Valve Lash Caps Matter
In high-performance and racing applications, the tip of a valve stem endures tremendous punishment. At elevated RPM, a rocker arm can act almost like a hammer against the valve tip — and if lash clearance isn't properly managed, the consequences range from accelerated wear to broken valve train components or even a burnt valve. Lash caps serve a dual purpose: they shield the valve tip from this repetitive impact, and on engines with non-adjustable valve trains, they can be selected in varying thicknesses to dial in the correct lash specification.
Lash caps are especially important when titanium or stainless steel valves are in use. Because titanium valves often lack hardened tips, a lash cap acts as a sacrificial wear surface — far cheaper and easier to replace than the valve itself. They also increase the contact diameter at the valve tip, giving the rocker arm's roller or pad a larger, more stable footprint on which to operate.
Key Considerations When Shopping Valve Lash Caps
- Valve stem diameter: Lash caps must match the exact stem diameter of your valves — common sizes include 5/16 in., 11/32 in., 3/8 in., 7mm, 6mm, 5.5mm, and 5mm.
- Cap thickness/depth: Available in multiple thicknesses (often ranging from .035 in. to .120 in.) to allow fine-tuning of valve clearance for your specific engine build.
- Material and hardness: Look for caps made from hardened tool steel or chromoly steel — through-hardened options offer the best durability under race conditions.
- Application: Whether you're protecting titanium valves or correcting rocker geometry, confirm the cap is engineered for your engine family and rocker arm type.
Top Brands for Engine Valve Lash Caps
COMP Cams is one of the most recognized names in performance valve train components, and their lash cap lineup reflects the same precision the brand brings to camshafts and springs. COMP Cams lash caps are precision-machined and ground perfectly flat to maintain accuracy of valve train adjustment, and are available for a wide range of valve stem sizes — including application-specific options for engines like the 426 HEMI.
Crower brings decades of racing heritage to their lash cap selection. Machined from high-grade chromoly steel and heat-treated for added strength, Crower lash caps protect valve ends from excessive wear and help correct rocker geometry by increasing rocker arm to retainer clearance — making them a trusted choice for serious performance builds using stainless steel or titanium valves.