Spring Washer
Spring washers are small components that do an outsized job. A spring washer is a disk of metal formed so that it deflects under load, acting like a spring and providing preload between two surfaces. In vehicles, engines, power equipment and shop machinery, that bit of elasticity helps keep fasteners from backing off when vibration, heat cycles and shock loads work against them.
What Spring Washers Do
A bolted joint is only as reliable as the clamping force it maintains. Over time, vibration can cause nuts and bolts to gradually unwind, and thermal expansion and contraction can relax a joint that was properly torqued. Spring washers add controlled elasticity to the assembly. They are typically used where an assembly needs to take up play, eliminate rattle, maintain tension, compensate for expansion or contraction, or absorb intermittent shock loads.
Common Types of Spring Washers
- Split lock washers (helical spring washers): A flat, circular washer with a split in its circumference. When compressed, the split ends exert force that resists loosening from vibration.
- Wave washers: Characterized by an undulating form, they provide a compensating spring force and help sustain a load or absorb shock.
- Belleville (conical) washers: Cupped, disc-shaped springs that offer high load capacity in a compact space and can be stacked to change the spring constant or deflection.
- Finger, curved and other specialty washers: Used to take up end play or apply light, consistent preload in specific assemblies.
What to Consider When Shopping
Start with the fit. The washer's inside diameter must match the bolt or shaft, and its thickness and outside diameter should suit the space available. Next, consider the load: a light-duty wave washer that takes up play in an assembly is very different from a stacked disc spring supporting a heavy load. Material matters too. Spring steel is common for general use, while stainless steel is a better choice where moisture or corrosion is a concern, such as marine and outdoor equipment.
Also keep in mind that spring washers are often model-specific replacement parts in equipment such as spray guns and other tools, where the original washer is sized to work with a particular spring, needle or seat. In those cases, matching the manufacturer's part number is the most reliable way to restore proper function.
Featured Brand
Sharpe spring washers are a good example of the replacement-style washers found in this category. Sharpe is known for paint spraying equipment and accessories for the professional automotive refinisher, and it has been part of Graco since 2003. Its spring washer is a small internal component that supports the proper operation of that equipment.
Keeping Joints Secure
Whether you are rebuilding a spray gun, servicing a piece of power equipment or assembling a bolted joint that sees constant vibration, choosing the right spring washer is a low-cost way to protect a more expensive assembly. Check the size, material and design against your application, and replace washers that look flattened, cracked or worn, since a spring washer that has lost its tension can no longer do its job.