NGK 96002 LKR6BGP-E G-Power Platinum Spark Plug

The NGK 96002 (LKR6BGP-E) G-Power Platinum spark plug gives you the durability of platinum at a moderate price. It has a fine wire platinum center electrode and a trapezoidal cut ground electrode. Compared with conventional nickel plugs, it is built for longer service intervals, quicker starts, better throttle response and improved fuel efficiency. It works as an upgrade over OE nickel alloy plugs or as a lower-cost alternative to double precious metal plugs.

Key Features:

• Single platinum tip: 0.6 mm fine wire platinum center electrode gives a stable spark and good durability, and lowers the voltage needed to fire
• Trapezoidal cut ground electrode: reduces quenching for better ignitability and performance
• Solid copper core: 98% pure copper for strong heat dissipation, conductivity and a wide heat range
• Cold-rolled threads: help prevent cross-threading and cylinder head damage
• Trivalent metal plating: resists corrosion and seizing
• Corrugated insulator ribs: help prevent flashover
• Resistor design: special resistor helps suppress radio frequency interference

Specifications:

• NGK stock number: LKR6BGP-E
• Thread diameter: 12 mm
• Thread pitch: 1.25 mm
• Reach: 26.5 mm (1.04 in)
• Hex size: 5/8 in (16 mm)
• Seat type: Gasket
• Terminal: Solid
• Heat range: 6
• Pre-set gap: 1.0 mm (approx. 0.039-0.040 in)
• Center electrode: Platinum, copper core
• Ground electrode: Single, nickel, trapezoid cut
• Insulator: Ceramic
• Torque: 10.8-18 lb-ft in cast iron heads, 10.8-14.5 lb-ft in aluminum heads
• OE cross-reference: 18846-08060 (SILZKR6D-8E)

The plug comes pre-gapped. Check the gap before installation and tighten to the specified torque for reliable ignition performance.