Fast Shafts Axle Yoke
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
Fast Shafts Axle Yokes: Race-Proven Driveline Connections
When power transfer between the transmission and driveshaft has to survive lap after lap of oval track punishment, the axle yoke becomes one of the most critical links in your driveline. Fast Shafts — a Des Moines, Iowa manufacturer with roots stretching back over thirty years — has built its reputation on precisely engineered driveline components, and their axle yoke lineup reflects that same race-focused philosophy.
Slip Yokes Built to Stay in One Piece
Fast Shafts' flagship chromoly billet slip yoke is built strictly for Super Late Models and Open Modifieds, designed so you never shear another slip yoke. It measures 9 inches from the center of the u-joint to the end of the barrel, with 7 inches of seal surface. That extra material and billet construction means the yoke can absorb the shock loads and torque spikes common in dirt track and oval racing without giving up.
Fast Shaft slip yokes measure 3-1/4 inches wide and are available in a broad range of lengths — from the FS001 at 8 inches total with a 6-inch seal surface all the way down to shorter options, with hardened and heat-treated variants also in the lineup. Whether you need a standard 27-spline fitment or a hardened version for the most demanding applications, Fast Shafts stocks options to match.
Transmission Yokes for Popular Race Transmissions
The transmission yoke selection from Fast Shafts spans multiple configurations, including steel yokes for the TH400, BW Super T-10, and Doug Nash units, as well as 1310-series yokes in multiple lengths to fit the 200-4R, 4L60, 700R4, Muncie, Powerglide, and TH350 transmissions. This breadth of fitment makes it straightforward to find a direct-replacement or upgraded yoke regardless of your gearbox choice.
Engineered as Part of a Complete Driveline System
What sets Fast Shafts axle yokes apart is that they are designed to work seamlessly with the brand's own driveshaft lineup. Fast Shafts, a division of Axle Exchange, Inc., has been manufacturing high-quality racing driveshafts and driveline components since 1992, originally founded as a constant velocity axle rebuilder before expanding into performance driveline solutions built specifically for the demands of oval track racing. That heritage means every yoke is sized and toleranced to pair correctly with Fast Shafts driveshafts, reducing the guesswork when assembling or refreshing a complete driveline.
Fast Shafts currently builds driveshafts for 90% of the major chassis builders , and their yokes share the same manufacturing standards — measuring down to 1/16 inch on every build, with all components precisely fabricated and balanced using high-end machinery.
Which Fast Shafts Yoke Is Right for Your Application?
- Super Late Models & Open Modifieds: The 9-inch chromoly billet slip yoke with 1310 u-joint compatibility and 7-inch seal surface is the top choice for high-horsepower oval applications.
- Street Stock & Modified classes: Standard steel slip yokes in multiple lengths (FS001–FS010 series) cover the widest range of GM-spline transmissions.
- Hardened & Heat-Treated options: The FS006HD and FS010 variants add surface hardness for applications where wear or shear failure has been a recurring issue.
- Transmission-specific yokes: Steel 1310-series yokes in 27-spline and 32-spline configurations fit the most popular circle track transmissions, from Powerglide to TH400.
Browse the full selection of Fast Shafts axle yokes below, or explore the complete Fast Shafts brand catalog for matching driveshafts, u-joints, rear-end yokes, and more.