Exhaust Spring
Dorman 03080 Exhaust Flange Spring 0.50" ID x 0.75" OD x 1.13" Length
Dorman 03081 Exhaust Flange Spring 0.825 In. OD x 1.135 In. ID x 1.570 In.
Ticon 108-00211-1102 Titanium Spring Tab and Spring Kit with Green Silicone
Ticon 108-00211-1101 Titanium Exhaust Spring Tab and Spring Kit, Black Silicone
Ticon 108-00200-0011 Stainless Beehive Tension Spring for Exhaust Slip Joint Connectors
AP Exhaust 4971 Exhaust Bolt and Spring Set - GM, Ford, Mazda - 10 Piece
What Are Exhaust Springs and Why Do They Matter?
Exhaust springs are small but essential components in a motorcycle or off-road bike's exhaust system. Their primary job is to secure exhaust pipe joints — such as the connection between a header pipe and a mid-pipe or slip-on — while still allowing a controlled degree of flex. That combination of retention and movement is exactly what makes them so important.
Exhaust systems are subjected to extreme heat cycles every time an engine runs. As pipes heat up, they expand considerably; if they were bolted rigidly at every joint, that expansion would cause warping, cracking, or seized fasteners over time. Exhaust springs solve this by holding joints together under constant tension while permitting just enough movement to absorb thermal expansion and engine vibration. On dirt bikes and off-road machines in particular, springs also counteract the independent vibration frequencies experienced by the engine and the chassis, reducing stress concentrations that can crack welds or split pipes at the flange.
Beyond protecting the hardware, exhaust springs serve a practical benefit in the shop: they make exhaust removal significantly faster and easier than threaded fasteners, which are notorious for seizing under sustained high heat. A spring can be pulled with a simple hook tool in seconds, making pipe swaps and packing replacements far less of a chore.
Choosing the Right Exhaust Spring
Sizing is the most critical factor when selecting replacement exhaust springs. Springs should always be measured when removed from the bike, with the length taken from the inside of one hook to the inside of the opposite hook. As a general rule, a spring should never be extended more than 20% beyond its free length during installation — overextension weakens the spring and shortens its service life. Common sizes range from as small as 38mm up to 100mm or more, so matching the correct length to your bike's specific pipe configuration is essential.
Material matters too. Zinc-plated steel springs offer economical durability for recreational riders, while stainless steel springs provide superior corrosion resistance and strength — a worthwhile upgrade for bikes ridden in muddy, wet, or high-heat racing conditions. A swivel hook on at least one end is a feature worth seeking out, as it eliminates binding during installation and helps the spring seat evenly, extending its working life.
Top Exhaust Spring Brands
Helix Racing Products is the category leader with the widest selection of exhaust springs available, offering both zinc-plated and stainless steel options in sizes spanning 57mm to 100mm. Helix caters specifically to the powersports market with products packaged for both individual consumers and service departments, making them a staple in motocross pits and dealership service bays alike.
Moose Racing brings its off-road pedigree to exhaust springs with stainless steel, USA-made options featuring a swivel hook design that eliminates binding and extends spring life. Their springs are available across a wide range of sizes and cover most late-model two-stroke and four-stroke models, making them a trusted choice for competitive and recreational dirt riders.
BikeMaster rounds out the category with reliable replacement springs suited for a variety of motorcycle applications, offering riders a straightforward, quality option when it's time to replace worn or broken exhaust springs.