Zone Offroad J16N 4 Inch Suspension Lift Kit for Jeep Grand Cherokee ZJ

The Zone Offroad J16N is a complete 4-inch suspension lift system engineered to deliver the perfect balance of off-road performance and on-road handling for 1993-1998 Jeep Grand Cherokee ZJ 4WD models. This comprehensive kit provides the lift height needed to clear up to 32-inch tires while dramatically improving ground clearance and wheel travel for serious off-road adventures.

Complete Suspension System Includes:

• Four full-length replacement coil springs designed to maintain original ride quality while adding lift height
• Four nitrogen-charged Zone Nitro shocks with twin-tube design and 10-stage velocity-sensitive valving, specifically tuned for the ZJ platform
• Heavy-duty front and rear lower control arms with rubber bushings for improved strength, articulation, and proper caster correction
• Extended-length front sway bar links with urethane bushings to improve operating angle and reduce body roll
• Rear track bar relocation bracket to properly center the rear axle under the vehicle
• Transfer case drop kit to correct rear driveline angle and allow use of the factory rear driveshaft
• Rear pinion cam locks to rotate the rear pinion for proper driveline angles
• 3-inch bump stop extensions to protect suspension components while maximizing wheel travel
• All necessary hardware and detailed installation instructions

Key Features and Benefits:

• Provides 4 inches of lift for aggressive stance and superior ground clearance
• Accommodates up to 32-inch tires with room for articulation
• Bolt-on installation design for most applications (some modifications may be required)
• Premium nitrogen-charged dampers offer quick response time and reduced aeration
• Rubber-bushed control arms provide comfortable daily driving with off-road durability
• Made in the USA and backed by Zone Offroad's limited lifetime warranty

Installation Notes:

• Estimated installation time: 5.5 hours
• Professional installation recommended due to potential trimming or drilling requirements
• V8-equipped vehicles may not achieve full stated lift height; a 3/4-inch front coil spacer is commonly added to compensate for the heavier engine
• Vehicles with CV-style front driveshaft mounts require a Spicer-type U-joint conversion to eliminate vibration
• Front driveshaft length should be measured prior to installation to determine if modifications are needed

Whether you're building a dedicated trail rig or want an aggressive daily driver with serious off-road capability, the Zone Offroad J16N delivers proven performance with quality American-made components designed specifically for the Grand Cherokee ZJ platform.