AGA 09 9972 010 Secondary Air Injection Cleaner Tool Kit for BMW N62 Engine
What Is the Air Injection System?
Secondary air injection is a vehicle emissions control strategy introduced in 1966, wherein fresh air is injected into the exhaust stream to allow for a fuller secondary combustion of exhaust gases. Sometimes called the AIR system or colloquially the "smog pump" system, it plays a quiet but critical role every time you start a cold engine. Air injection systems are a critical part of your vehicle's emission control strategy, designed to reduce harmful pollutants before they leave the tailpipe — injecting fresh air directly into the exhaust stream or catalytic converter during specific operating conditions, allowing unburned fuel and carbon monoxide to combust more completely.
Why the Air Injection System Matters
On average, up to 80 percent of the emissions of a driving cycle are emitted during a cold start. This is because gas-powered engines aren't 100% efficient — there is always a portion of unburned fuel (hydrocarbons) that doesn't get converted to engine power, and this is particularly true on cold starts, when the fuel/air mixture runs richer for more reliable starting. The air injection system tackles this problem head-on by supplying oxygen-rich air to the exhaust stream precisely when it's needed most.
When the oxygen provided by the system mixes with post-combustion exhaust, oxidation occurs — hydrocarbons and carbon monoxide are converted into less harmful emissions like water and carbon dioxide, while the continued burning of fuel also increases exhaust gas temperature, helping the catalytic converter heat up to operating temperature more quickly.
How the System Works
The Secondary Air Injection System — also known as the Air Injection Reactor (AIR) system — pumps fresh air into the exhaust system to cause further oxidation of unburned fuel, reducing hydrocarbon (HC) and carbon monoxide (CO) emissions. The system includes an electric or belt-driven air pump, an air control valve, a vacuum switch, a diverter valve, one-way check valves, and hoses and tubing. Pressurized air is fed into the exhaust system near the exhaust ports and at the catalytic converter, but not at the same time.
When the catalytic converter is cold, air injected at the upstream point burns with the deliberately rich exhaust to bring the catalyst up to operating temperature quickly. Once the catalyst is warm, air is injected to the downstream location — the catalytic converter itself — to assist with catalysis of unburned hydrocarbons.
The secondary air can be supplied actively or passively. In a passive system, the fluctuations in pressure of the exhaust system are utilized, with additional air drawn in via a timed valve due to the vacuum created through the flow speed in the exhaust pipe. In an active system, the secondary air is blown by a pump, which allows better control.
Key Components in This Category
The air injection system is made up of several interconnected subcategories of parts, each serving a distinct function:
- Air Injection Pumps (Smog Pumps): Pumped air injection systems use a vane pump — called the air pump, AIR pump, or colloquially "smog pump" — turned by the engine via a belt or electric motor.
- Check Valves: A check valve prevents exhaust from forcing its way back through the air injection system, which would damage the pump and other components.
- Diverter & Control Valves: To prevent the damaging effects of explosive combustion during deceleration, a diverter valve senses the sharp increase in intake manifold vacuum from sudden throttle closure and diverts the air pump's outlet to atmosphere.
- Air Injection Pipes & Tubes: A catalytic converter air tube is a metal or composite conduit that carries pressurized fresh air from the air injection pump to the catalytic converter or exhaust manifold — typically made of stainless steel or aluminum to withstand extreme heat and corrosive exhaust fumes.
- Solenoid Valves, Relays & Sensors: Solenoid secondary-air valves may be equipped with an integrated pressure sensor for on-board diagnosis (OBD) monitoring.
Diagnosing & Maintaining Your Air Injection System
Secondary air systems monitored by the engine control unit's self-diagnosis function will cause the engine indicator lamp to illuminate in the event of a fault. Because combination valves live in the exhaust system, they often become carboned up over time, allowing hot exhaust gases to enter the pump, condense into water, and damage the pump's electronics — meaning a failed valve should be replaced right away to prevent damage to the more expensive pump. Regular inspection of hoses, valves, and pump connections can catch these issues early and keep your vehicle passing emissions tests and running cleanly.