Wilwood 260-5751 Reservoir
Remote Master Cylinder
Aluminum Tandem Master Cylinder
Wilwood?s tandem chamber master cylinders are fully machined from a
High-pressure die casting of a premium alloy, it incorporates
slotted mounting flange to accommodate mount centers between 3.22?
to 3.40? and also features side-hole mounts on 6.40? centers.
Master cylinder is has full separation between the front and rear
chambers . Dual outlets allow for right or left hand plumbing based
on mount location. Offers a total piston stroke of 1.10? and a 2:1
volume ratio between the primary and secondary chambers. Available
in 7/8?, 1? or 1-1/8? bore sizes. Available also in a media
burnished version and a black E-coat finished units.
Aluminum Tandem Master for Mustang
Wilwood?s tandem chamber master cylinders for early Mustangs are
fully machined from a High-pressure die casting of a premium alloy,
it incorporates slotted mounting flange to accommodate the correct
mount centers used in 60?s and 70?s Ford vehicles These master
cylinders is has full separation between the front and rear
chambers necessary for redundancy and safety. Dual outlets allow
for right or left hand plumbing based on mount location and also
offers a total piston stroke of 1.10?, with a 2:1 volume ratio
between the primary and secondary chambers. Available in 7/8? bore
and OE style adjustable pushrod that
allows interface with manual pedal assemblies. Available also in a
media burnished version and a black E-coat finished units.
Compact Remote Combination Master
Wilwood?s Compact Combination Master Cylinders have been designed
for limited space applications requiring the output capacity of a
full size master cylinder. The ultra short 3.37?compact body
provides 2.16? of additional clearance between the mounting flange
and the fluid outlet. A full 1.12? of piston stroke meets or
exceeds the stroke capacity of most full size cylinders. With 1/8?
NPT fluid outlet port located at the top
radius of the cylinder bore, reduces the chances for trapped air.
The black E-Coated aluminum body resists corrosion and maintains a
durable long lasting finish.
Compact Remote Side Mount Master Cylinder
Wilwood?s Compact Combination (Side Mount) Master Cylinders have
been designed for limited space applications requiring the output
capacity of a full size master cylinder. The ultra short
3.37?compact body provides 2.16? of additional clearance between
the mounting boss and the fluid outlet. The new body design
incorporates integral side mounting lugs with a 3.00? center to
distance and no traditional mounting flange, which further enhances
its ability to mount in tight spaces. A full 1.12? of piston stroke
meets or exceeds the stroke capacity of most full size cylinders.
With 1/8? NPT fluid outlet port located
at the top radius of the cylinder bore, reduces the chances for
trapped air. Enhanced fluid inlet port allows mounting of the
standard reservoir included in kit and also contain 11/16-20
internal threads for custom reservoir arrangements. The black
E-Coated aluminum body resists corrosion and maintains a durable
long lasting finish.
High Volume Master Cylinder
Wilwood High-Volume Aluminum Master feature high pressure die-cast
bodies from high-grade aluminum. Wilwood. High-Volume Master
Cylinders have the highest fluid capacity of any integral reservoir
design. With a total capacity of 8.2 ounces, there is at least 26%
more fluid volume than other brands. . With 1-7/16? of piston
travel, it offers extra margin when used with large piston
calipers. Heavy duty internal springs provide fast retraction.
Formed steel lids with bellows type gaskets keep the fluid in and
the moisture out. Wilwood master cylinders use common dimensions
for flange or side mounting and a 1/8-27 NPT outlet port.
Integral Reservoir Compact Master
This popular lightweight, compact design is used for clutch and
small master cylinder requirements and is well known for its
dependability. It incorporates an improved plastic screw-on filler
cap which protects the fluid in the 1.4 ounce reservoir, and is
available in all three bore sizes.
Compact Master Cylinder
Remote Reservoir Compact Master Cylinders are the perfect solution
for club sport racers, small open wheel cars, or any other custom
application where there is limited space for the master cylinder
and fluid reservoir. Aluminum cylinders designed for use with
either a detachable or remote fill reservoirs. Available in three
bore sizes from .625? to .750? with a full 1.4? of stroke to
accommodate short pedal ratios, small brake calipers, and hydraulic
clutch actuation on space limited applications. Reservior kits with
fittings are availble under part #?s 260-7577 (4.0 Oz.) or 260-8742
Combination Remote Master Cylinder
Combination Remote Master Cylinders offer six different bore sizes
and four different installation configurations that are available
with this master cylinder kit. Precision machined from high
strength aluminum, this kit includes both small and large size
reservoirs which can be mounted directly on the master cylinder or
remotely mounted for more convenient service access. Standard
mounting bolt hole configurations provide easy applications for
racing and off road vehicles, specialty cars, recreation and
Tandem Master Cylinder
Made from durable lightweight aluminum with a large capacity
plastic reservoir and dual outlet bores, this master cylinder
utilizes standard O.E.M. internal components. Standard factory
mounting bolt holes can be adapted to racing pedal assemblies with
an optional mounting adapter bracket (including push rod and dust
boot, see diagram below). This lightweight (2.5 pounds) reliable
master cylinder is used for Drag Racing, Late Model Stock Cars,
Street Rod and Off Road applications.
Tandem Remote Master Cylinder
Wilwood?s Remote Tandem master cylinders provide one of the safest
ways to actuate four wheel or dual caliper axle brake systems. The
cylinder features 50/50 output from a 1.00? bore with 1.10? stroke.
This master cylinder can be bolted directly to Wilwood?s single
mount pedals. The kit is shipped complete with the master cylinder,
pre-installed 4 ounce reservoirs and 3.38? x 5/16-24 pushrod.
Go Kart Master Cylinder
This super lightweight (only .55 pounds) 1/2? bore aluminum master
cylinder designed specifically for Kart and Jr. Dragster racing
applications incorporates an adjustable lever ratio with a remote
mount clear fluid reservoir for easy monitoring. The assembly comes
ready to install and includes billet bracket, lockwired drilled
hardware and fluid line fitting. The unit is best utilized in
conjunction with Wilwood?s Kart / Jr. Dragster caliper.
Handlebar Master Cylinder
Wilwood?s 5/8? bore Right Hand Handlebar Master Cylinder is
compact, lightweight and specifically designed for a variety of
recreational, sport and outdoor equipment applications. Constructed
of materials and finishes designed to resist corrosion, our master
cylinder fits standard 7/8? diameter handlebars and is also
available with matching L/H units. Impact resistant lever assembly
comes with a three-position hydraulic parking brake lock. The
housing is designed to accept a threaded brake light switch
(1/4-32). The large capacity reservoir is translucent for easy
fluid level viewing. The fluid inlet accepts an M10 ? 1 thread, Banjo type fitting.
Kart Master Cylinder (RM1)
Replacement cylinder assembly for Wilwood?s Kart master Cylinder.
Easy bolt on replacement onto your existing bracket assembly.
Motorcyle Foot Pedal Master Cylinder
Wilwood??s Right Hand Motorcycle Foot Pedal Master cylinder comes
with show chrome finished body and lid. Constructed of billet
aluminum, this forward control master cylinder comes with an
industry standard 5/8? bore and 3/8-24 threaded outlet with
relieved area for banjo fitting seal. Side mounting holes are 2.25?
TM1 5/8 Tandem Master
The TM1 master cylinder is manufactured
from lightweight aluminum with a 5/8? bore and dual 10mm x 1.00
outlets. Side mounting on 3.53? bolt spacing using 5/16? bolts,
it?s compact design is perfect for applications where space is
limited. Includes push rod, dust boot and a permanent mount .39?
diameter clevis. An alternative 5/16-24? threaded pushrod is
available under part # 230-7134. Remote reservoir kits are
available under part # 260-11098.
This ?Pull Type? slave cylinder is made from billet aluminum for
high strength and plated with a tough anti-corrosion finish. The
stainless steel push rod has a longer stroke than most cylinders
assuring a full release of the clutch. Ideal for Drag Racing, Late
Model Stock, Pro Series and Off Road applications. Recommended
master cylinder sizing is ??.